Caterpillar Wheel Loader 924K | 11.7 ton

Description

Caterpillar Wheel Loader 924K | 11.7 ton

The Caterpillar 924K is a versatile small wheel loader known for its “Optimized Z-bar” linkage, which combines the high breakout force of a traditional Z-bar with the parallel lifting capabilities of an industrial tool carrier.
The 11.7 ton (11,795 kg) operating weight you mentioned typically refers to the standard lift configuration with a general-purpose bucket.2 Below are the detailed technical specifications for this unit.

Engine & Power

The 924K is powered by the Cat C7.1 ACERT engine.
It features “Power-by-Range” technology, which automatically increases power in higher gear ranges.

Feature Specification

Engine Model Cat® C7.1 ACERT™.
Max Gross Power 105 kW (141 hp).
Rated Net Power 102 kW (137 hp) @ 1,800 rpm.
Max Gross Torque 725 N·m (534 lbf·ft).
Displacement 7.01 L.
Emission Standards Tier 3 / Stage IIIA equivalent.

Operating Weights & Capacities

The weight of the unit can vary slightly depending on the tire choice, counterweights, and bucket type.
Operating Weight: ~11,795 kg (11.7 tonnes).
Bucket Capacity: 1.7 – 5.0 m³ (2.2 – 6.5 yd³).
Fuel Tank Capacity: 195 L.
Hydraulic System (Total): 160 L.
Static Tipping Load (Full Turn): ~7,499 kg (varies by bucket).

Performance & Dimensions

Dimension / Performance Value.
Travel Speed (Max) 40 km/h (25 mph).
Turning Radius (Outside Tires) 5,404 mm.
Bucket Pin Height (Max Lift) 3,853 mm.
Dump Clearance (45° Discharge) 2,801 mm.
Overall Length 7,418 mm.
Overall Height (to top of Cab) 3,340 mm.

Key Features

Intelligent Hydrostatic Drivetrain: Provides smooth, step-less acceleration and adjustable “Hystat” modes (Ice, Conventional, Torque Converter, and Default).
Optimized Z-bar Linkage: Delivers parallel lift to keep loads level while maintaining high digging power.
Performance Series Buckets: Designed with curved side bars and a wider throat for faster loading and better material retention.
Operator Cab: Features a seat-mounted joystick, low sound levels, and optional secondary display for machine fine-tuning.
Note: Performance data (like tipping load and breakout force) is based on the machine using 20.5 R25 tires and a 2.1 m³ general-purpose bucket.
Would you like me to look up the specific lifting capacities for a particular attachment, like pallet forks or a high-lift configuration?