Toyota Towing Tractor 4CBTY2 | 2 ton

Description

Toyota Towing Tractor 4CBTY2 | 2 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Towing Tractor 4CBTY2 | 2 ton

The Toyota 4CBTY2 is a compact, electric standing-rider towing tractor designed for high-efficiency horizontal transport, commonly used in narrow aisles or for frequent hitching/unhitching tasks.
Below are the primary technical specifications for the 2-ton (2,000 kg) model:

Performance & Capacity

Towing Capacity 2,000 kg (2.0 tonnes).
Drive Unit AC (Alternating Current) Motor.
Travel Speed (Full Load) Approx. 7.0 – 8.0 km/h.
Travel Speed (Unloaded) Approx. 12.0 – 13.0 km/h.
Maximum Gradeability 10% (varies by load weight).

Dimensions & Chassis

Operator Type: Stand-up / Rider.
Turning Radius: Very tight (approx. 1,400 mm – 1,500 mm), allowing for U-turns in confined warehouse corridors.
Tires: Usually equipped with non-marking or solid rubber tires (Urethane wheels are common for smooth indoor floors).
Braking System: Electric regenerative braking (activates when the accelerator is released) and a mechanical parking brake.

Electrical System

Voltage: 48V system.
Battery Compartment: Designed for quick side-extraction or top-loading, depending on the specific chassis configuration.
Controller: Toyota’s specialized AC controller, which allows for programmable speed settings and acceleration curves to match specific warehouse safety protocols.

Key Features

Ergonomics: Low step-in height to reduce operator fatigue during frequent on/off movements.
Hitch Control: Often equipped with “inching” buttons located on the rear of the unit, allowing the operator to move the tractor small distances while standing behind it to align the hitch easily.
Operator Presence Sensing (OPS): A safety system that prevents the tractor from moving unless the operator is properly positioned on the floor mat.
Would you like me to look up the specific maintenance fluid types or the electrical wiring diagrams for this model?

Main Specification

Toyota Towing Tractor 4CBTY2 | 2 ton

Model : 4CBTY2.
Operator Position : Sit-down.
Maximum Drawbar Pull (3-Minute Ratings) : 17640 (4000) N (kg).
Towed Weight 60-Minute Ratings : 2000 kg.
Overall Width A : 1420 mm.
Turning Radius (Outside) : 1600 mm.
Overall Height : 1185 mm.
Height (with cabin) B : 1325 (1895) mm.
Length (with hitch) C : 3615 mm.
Turning Radius (Outside) D : 3295 mm.
Battery Voltage/Capacity (5-hour ratings) : 80/445 V/AH.
Electric Motor : 16.6 kw.

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.

Pulau kalimantan :

Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan