Toyota Forklift 8FBR10 | 1 ton

Description

Toyota Forklift 8FBR10 | 1 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift 8FBR10 | 1 ton

Berikut adalah spesifikasi teknis lengkap untuk unit Toyota Electric Reach Truck 8FBR10 kapasitas 1 ton (1.000 kg):

Spesifikasi Utama (Main Specifications) Toyota Forklift 8FBR10 | 1 ton

Produsen: TOYOTA.
Model: 8FBR10.
Kapasitas Beban (Load Capacity): 1.000 kg.
Pusat Beban (Load Center): 500 mm.
Tipe Daya (Power Type): Baterai (Elektrik).
Posisi Operator: Berdiri (Stand-Up).
Tipe Ban (Front/Rear): Cushion / Cushion.
Jumlah Roda (Depan/Belakang): 2 / 1x+2 (x = roda penggerak/drive wheel).

Dimensi & Ukuran Toyota Forklift 8FBR10 | 1 ton

Panjang Keseluruhan (Overall Length): 1.820 mm.
Panjang hingga Muka Garpu (Length to Fork Face): 1.050 mm.
Lebar Keseluruhan (Overall Width): 1.090 mm.
Lebar di Antara Kaki Reach (Width Between Reach Legs): 755 mm.
>Tinggi Pelindung Atas (Overhead Guard Height): 2.250 mm.
>Tinggi Mast Turun (Mast Lowered Height): 1.995 mm (untuk standar tiang V-3000 mm).
>Tinggi Mast Naik Maksimal (Mast Extended Height): 3.885 mm (untuk standar tiang V-3000 mm).
Ukuran Garpu (T x W x L): 30 mm x 100 mm x 770 mm (opsi standar bervariasi hingga 1.070 mm).
Jarak Jangkauan Garpu (Reach Stroke): 440 mm.
Radius Putar Luar (Turning Radius): 1.340 mm.
Lebar Koridor Kerja Minimal (Right Angle Stacking Aisle Width): 2.540 mm (menggunakan palet ukuran 1.100 x 1.100 mm dengan jarak aman tambahan 200 mm).

Performa & Kecepatan

Kecepatan Lintasan (Travel Speed):
Dengan Beban: Maks. 9,5 km/jam.
Tanpa Beban: Maks. 10,5 km/jam.

Kecepatan Angkat (Lifting Speed):
Dengan Beban: 350 mm/detik.
Tanpa Beban: 560 mm/detik.

Kecepatan Turun (Lowering Speed):
Dengan Beban: 500 mm/detik.
Tanpa Beban: 550 mm/detik.
Daya Tanjak (Gradeability) – Rating 5 Menit:
Dengan Beban: 19%
Tanpa Beban: 32%

Spesifikasi Baterai & Motor Listrik

Tegangan / Kapasitas Baterai (Rating 5 Jam):
Standar (Minimal): 48 Volt / 201 Ah
Maksimal: 48 Volt / 240 Ah
Bobot Baterai Standar: ±355 kg
Motor Penggerak (Drive Motor): 4,9 kW (Sistem Kontrol AC Inverter)
Motor Hidrolik (Load Handling Motor): 8,0 kW (Sistem Kontrol AC Inverter)
Motor Power Steering: 0,26 kW (Sistem Kontrol DC Chopper)
Tekanan Operasional Sistem Hidrolik: 12,2 MPa

Berat Unit

Berat Total (Tanpa Baterai): 1.645 kg

Fitur Unggulan Seri 8FBR

SAS-R (System of Active Stability for Reach): Sistem kestabilan aktif khas Toyota yang memantau operasi forklift secara otomatis guna mencegah risiko unit atau beban terbalik/tidak stabil saat bermanuver atau melakukan reach-out.

Regenerative Systems: Mengembalikan energi ke baterai saat deselerasi/pengereman untuk menghemat konsumsi daya.

Smart Charging System & Battery Protecting Function: Melindungi masa pakai baterai dari pengisian daya berlebih.

Deluxe Multifunction Display: Memudahkan operator memantau sisa kapasitas baterai, jam kerja (hour meter), kecepatan, serta indikator beban.

Anti-Rollback & Auto Power-Off: Keamanan tambahan saat berhenti di area tanjakan/turunan dan otomatis mati jika ditinggalkan dalam waktu tertentu

The Mastery of True Potential

Mastery of any undertaking can only be achieved if there is true potential and unwavering dedication to excellence. To Toyota, the 8 Series is the proud culmination of 50 years in the pursuit of mastery in the development and manufacture of forklifts.

Outstanding Comfort and Visibility

The 8 Series provides the comfort and visibility for long hours of efficient operation.

Efficiency-Boosting Operability

The operator’s compartment is carefully designed to ensure maximum forklift control from minimum operator effort.

Top-Class Stability

Toyota’s System of Active Stability (SAS), Operator Presence Sensing (OPS) system and Travel and Load Handling Control provide innovative, high-tech stability to the 8 Series.

Environmental Friendliness

Low noise and exhaust emissions make the 8 Series environmentally friendly.

Built-in Reliability and Serviceability

Designed to be tough and easy to maintain.

True Potential Through Outstanding Comfort and Visibility

Comfort is a Toyota tradition. With the 8 Series, it starts from the time you enter. Grab the large assist grip, place your foot on the wide, low step and slide into the operator’s seat that provides comfort, support and retention.

Once you have been seated and wrapped your hands around the small- diameter steering wheel you will intuitively feel that everything you need for operating the forklift is within natural reach.

You will also instantly realize that you have a clear view of the forks and load.

This comfort sets the stage for reaching the true potential of the forklift from Toyota.

Easy Entry and Exit

A large assist grip, A deep, wide step and a spacious opening team up for easy entry onto the forklift.

Comfort and Support ORS* Seat

The ORS seat can be adjusted 150 mm forward and backward to provide comfort and support to almost all sizes of operators. *ORS: Operator Restraint System.

Outstanding Visibility

The overhead guard, mast and instrument panel have been designed to provide excellent visibility of the fork tips at the most frequently used lift heights.

Wide Floor Space

The spacious floor area enables a more relaxed operating position that contributes to comfort.

True Potential Through Outstanding Operability

Toyota used the latest technology to reexamine forklift operation in its search for enhanced operability. Motion-capture technology monitored every aspect of operator movement looking for ways to make operation more efficient.

Based on these findings, well-thought-out design changes were combined to make the 8 Series ready to transform every action of the operator into smooth and efficient operation.

Operator-Friendly Steering Wheel

The small-diameter steering wheel teams up with the full hydraulic power steering system to provide excellent maneuverability. The steering column offers step-less adjustment to accommodate a wide range of operator preferences.

Bagian bagian componet forklift terdiri dari Mesin, Transmisi, roda depan, roda belakang, rem, hydraulic, steer, mast dll

Foot-Activated Parking Brake (Powershift models)

The operator simply depresses the parking brake pedal to set it without changing operating position. A conveniently located handle is used to release it.

Rear-Pillar Assist Grip / Swivel Seat

The seat swivels to the right to facilitate operation in reverse. Firstly,The seat also swivels to the left to make it easier to enter and exit the forklift.

An optionally available rear-pillar assist grip with a horn button enhances comfort by offering easy horn operation while traveling in reverse

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,

Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,

suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.

Pulau kalimantan :

Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan