Toyota Pallet Stacker SWE145L | 1.45 ton

Description

Toyota Pallet Stacker SWE145L | 1.45 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Pallet Stacker SWE145L | 1.45 ton
Specification unit Toyota Pallet Stacker SWE145L | 1.45 ton

The Toyota BT Staxio SWE145L is a heavy-duty pedestrian pallet stacker known for its versatility, especially on uneven floors and ramps.
lass=”yoast-text-mark” />>The “L” in the model name indicates elevating support arms, which allow it to double as a pallet truck or handle two loads simultaneously.
Below are the primary technical specifications for this unit:

Performance & Capacity

Load Capacity: 1.45 tons (1,450 kg) on the main forks.
Support Arm Capacity: Up to 2,000 kg (when used as a low-lifting pallet truck).
Load Center: 600 mm.
Travel Speed: 6.0 km/h (both with and without load).
Gradeability: Up to 7% with load and 12% without load.

Mast & Dimensions

Maximum Lift Height: Standard heights go up to 5.4 meters, though specific mast options (Simplex, Duplex, or Triplex) can vary between 2.35m and 6.0m.
Free Lift: Depends on the mast type (e.g., Triplex HiLo masts offer significantly higher free lift for low-ceiling areas).
Overall Width: 790 mm (compact design for narrow aisles).
Turning Radius: Approximately 1,493 mm.
Aisle Width (Pallet 800×1200): Approximately 2,340 mm (lengthways).

Battery & Electrical

System Voltage: 24V.
Battery Capacity: Typically ranges from 225 Ah to 500 Ah, depending on the chassis size and intensity requirements.
Energy Options: Available in Lead-Acid or Lithium-ion technology.
Motor Type: AC drive motor (low maintenance and high efficiency).

Key Features

Elevating Support Arms: Essential for clearing dock levelers, ramps, and uneven thresholds.
lass=”yoast-text-mark” />>5-Point Chassis: Provides superior stability and traction, especially on slippery or uneven surfaces.
>Click-2-Creep: Allows the operator to drive the truck with the tiller arm in the upright position for extreme maneuverability in tight spaces.
lass=”yoast-text-mark” />>Sensi-lift: Provides precise, fingertip control for lifting and lowering speeds.
>Smart Truck: Equipped with telematics hardware as standard for fleet management (I_Site).
>Would you like me to compare these specs with a similar model, such as the SWE140 (without elevating arms) or the higher-capacity SWE160L?</p>

Specifications

Manufacturer Toyota
Model BT Staxio SWE145L
Drive Electric
Operator type Stand-in
Load capacity/rated load Q kg 1450
Support arm capacity Q kg 1450
Load center c mm 600
Load distance (support arms raised/lowered) x mm 659/690
/>Wheelbase (support arms ra

ised/lowered) y mm 1508/1539

Weight

Service weight with battery kg 1637
Axle load, with load, drive/castor/support arm wheel kg 571/521/2097
Axle load, without load, drive/castor/support arm wheel kg 621/397/563

Wheels

Drive/castor/fork wheel Polyurethane*
Wheel size, front mm ø250×92
Wheel size, rear mm ø85×74
Additional wheel size mm ø140×86
Wheels, number front/rear (X = driven wheels) 2(1X) / 4
Track width, front b10 mm 460
/>Track width, rear b11 mm 390

Dimensions

Height, mast lowered h1 mm 2371*
Free lift h2 mm 1894*
Lift h3 mm 5310*
Lift height h23 mm 5400*
Height, mast extended h4 mm 5916*
Initial Lift h5 mm 120
Height of overhead guard (cabin) h6 mm 2350
Stand height h7 mm 262
Height, fork lowered h13 mm 90
Overall length l
1 mm 2180
Length to face of forks l
2 mm 1030
Overall width b1 mm 790
Fork dimensions s/e/l mm 70/180/1150
Width over forks b5 mm 570
Ground clearance, center of wheelbase m1 mm 19,5
Aisle width for pallets 1000×1200 crossways Ast mm 2615
Aisle width for pallets 800×1200 crossways Ast mm 2588<br />Turning radius Wa mm 1740

Performance data

Travel speed, with/without load km/h 8/10
Lift speed, with/without load m/s 0,17 / 0,36
Lowering speed, with/without load m/s 0,45 / 0,47
Max. gradeability, with/without load 1) % 8/12
Acceleration time (over 10 m) s 5,5
S

ervice brake Electromagnetic</p>

Electric motor

Drive motor rating S2 60 min kW 2,8
Lift motor rating (S3 15%) / for 200DN (S3 8.5 at 150 bar) kW 3
Battery voltage/nominal capacity K5 V/Ah 24/210, 300, 420
Battery weight kg 29, 44, 58
Energy consumption acc

ording to EN16796 kWh/h 0,77

Others

Type of drive control Variable AC
Sound level at the driver’s ear according to EN12053 dB (A) 67