TCM Forklift FG25 | 2.5 Ton

Description

TCM Forklift FG25 | 2.5 Ton

The TCM FG25 (specifically models like the FG25T3 from the iNOMA series) is a highly regarded 2.5-ton gasoline/LPG forklift known for its reliability and ergonomic design.

Below are the standard technical specifications for the TCM FG25T3 model.

Core Specifications

Rated Capacity: 2,500 kg (2.5 Tons)
Load Center: 500 mm
Power Type: Gasoline / LPG (Liquid Propane Gas)
Operator Position: Seated
Transmission: Power-shift (Automatic) or Manual

Engine Performance (GCT/Nissan K21)

The FG25 typically utilizes the GCT (formerly Nissan) K21 engine, which is a staple in the industry for its balance of power and fuel efficiency.
Engine Model: GCT K21
Rated Horsepower: 34.6 kW @ 2,250 rpm
Rated Torque: 153.5 Nm @ 1,600 rpm
No. of Cylinders: 4
Displacement: 2,065 cc
Fuel Tank Capacity: 70 Liters

Dimensions & Weight

Overall Width: 1,150 mm
Length to Fork Face: 2,555 mm.

Overhead Guard Height: 2,070 mm – 2,130 mm (depending on profile)
Turning Radius (Outside): 2,240 mm.

Standard Fork Size: 1,070 x 122 x 40 mm
Total Service Weight: Approx. 3,570 kg

Mast & Lifting

Standard Max Lift Height: 3,000 mm (can vary with 3-stage masts up to 6,000 mm)
Mast Tilt Angle: 6° Forward / 12° Backward.

Lift Speed (Full Load): 540 mm/sec
Lowering Speed (Full Load): 450 mm/sec
Free Lift: 110 mm (Standard Simplex Mast)

Operational Performance

Travel Speed (Max): 18.5 – 19.0 km/h
Max Gradeability (Full Load): 24%.

Tire Type: Pneumatic (Front: 7.00-12-12PR | Rear: 6.00-9-10PR)
Ground Clearance: 110 mm (at mast) / 120 mm (at wheelbase center).

Note: Specifications can vary slightly based on the specific “T” series (e.g., T3 vs T6) and the year of manufacture. Attachments like side-shifters will also slightly reduce the net lifting capacity.
Would you like me to find a digital manual for this model or compare it with the Diesel (FD25) version?