Toyota Forklift FDZN25 | 2.5 ton

Description

Toyota Forklift FDZN25 | 2.5 ton

BELIALAT.COM support unit, parts, service, rental, maintenance cotract, overhaul, reconditioned Toyota Forklift FDZN25 | 2.5 ton

The Toyota FDZN25 is a diesel-powered counterbalance forklift from the Z-Series, designed as a “Simple and Tough” value model.
It is engineered for durability in high-intensity environments like warehouses, factories, and ports, featuring a reliable Toyota-built engine and enhanced safety systems.

Core Specifications

The following technical details outline the physical and operational capabilities of the FDZN25 unit:
Load Capacity: 2,500 kg (2.5 tons).
Load Center: 500 mm.
Engine Model: Toyota 1DZ-II Diesel (1DZ-III in some markets).
Piston Displacement: 2,486 cc.
Rated Power: 35 kW @ 2,200 rpm.
Max Torque: 156 N·m @ 2,100 rpm.
Transmission: Powershift (Automatic).
Physical Dimensions & Maneuverability.
The design focuses on a compact footprint to maintain efficiency in tighter workspaces while providing stability for 2.5-ton loads.
Overall Width: 1,150 mm.
Turning Radius (Outside): 2,260 mm.
Overhead Guard Height: 2,130 mm.
Length to Fork Face: 2,650 mm.
Standard Lift Height: 3,000 mm (V-Mast).
Ground Clearance: 90 mm (at mast, full load).

Key Features

Operator Presence Sensing (OPS): A safety system that prevents accidental travel or load handling if the operator is not seated correctly.
Ergonomic Design: Features a small-diameter steering wheel and a spacious operator area to reduce fatigue during long shifts.
Easy Maintenance: The wide-opening engine hood and two-piece floorboard allow for quick access to the engine and powertrain for routine inspections.
Stability Control: Equipped with a rear axle damper to enhance lateral stability during turns and high-lift operations.

Unit Availability

If you are looking to acquire one of these units, several configurations and conditions are available:
The Toyota FDZN25 (Z-Series) is frequently found in both new and high-quality used conditions, often featuring a duplex mast for standard lifting or triplex options for higher reach requirements. For heavy-duty industrial needs, the Toyota 8FD25 is a common alternative that shares the 2.5-ton capacity but belongs to the premium 8-Series lineup.

Main Specification Toyota Forklift FDZN25 | 2.5 ton

{ Model : FDZN25 } | { Engine Model : Toyota 1DZ-II } | { Load Capacity ; 2500 kg } | { Load Center : 500 mm } | { Overall Width A : 1070 mm } | { Turning Radius(outside) B : 1990 mm } | { Overhead Guard  Height C : 2080 mm } | { Length to Fork Face D : 2290 mm}.

Engine Specifications

{ Model : 1DZ-II Diesel engine } | { Piston Displacement : 2237 cc } { Rated Horsepower/r.p.m. : 40/2,400 (43/2,600) kw } | { Rated Torque/r.p.m : 162/1800 kw }

The Mastery of True Potential

Mastery of any undertaking can only be achieved if there is true potential and unwavering dedication to excellence. To Toyota, the 8 Series is the proud culmination of 50 years in the pursuit of mastery in the development and manufacture of forklifts.

Outstanding Comfort and Visibility

The 8 Series provides the comfort and visibility for long hours of efficient operation.

Efficiency-Boosting Operability

The operator’s compartment is carefully designed to ensure maximum forklift control from minimum operator effort.

Top-Class Stability

Toyota’s System of Active Stability (SAS), Operator Presence Sensing (OPS) system and Travel and Load Handling Control provide innovative, high-tech stability to the 8 Series.

Environmental Friendliness

Low noise and exhaust emissions make the 8 Series environmentally friendly.

Built-in Reliability and Serviceability

Designed to be tough and easy to maintain.

True Potential Through Outstanding Comfort and Visibility

most importantly, Comfort is a Toyota tradition. With the 8 Series, it starts from the time you enter. Grab the large assist grip, place your foot on the wide, low step and slide into the operator’s seat that provides comfort, support and retention.

Firstly, Once you have been seated and wrapped your hands around the small- diameter steering wheel you will intuitively feel that everything you need for operating the forklift is within natural reach.

Secondly, You will also instantly realize that you have a clear view of the forks and load. This comfort sets the stage for reaching the true potential of the forklift from Toyota.

Easy Entry and Exit

A large assist grip, A deep, wide step and a spacious opening team up for easy entry onto the forklift.

Comfort and Support ORS* Seat

In conclusion, The ORS seat can be adjusted 150 mm forward and backward to provide comfort and support to almost all sizes of operators. *ORS: Operator Restraint System.

Outstanding Visibility

The overhead guard, mast and instrument panel have been designed to provide excellent visibility of the fork tips at the most frequently used lift heights.

Wide Floor Space

The spacious floor area enables a more relaxed operating position that contributes to comfort.

True Potential Through Outstanding Operability

after that, Toyota used the latest technology to reexamine forklift operation in its search for enhanced operability. Motion-capture technology monitored every aspect of operator movement looking for ways to make operation more efficient.

Based on these findings, well-thought-out design changes were combined to make the 8 Series ready to transform every action of the operator into smooth and efficient operation.

Operator-Friendly Steering Wheel

accordingly, The small-diameter steering wheel teams up with the full hydraulic power steering system to provide excellent maneuverability.

The steering column offers step-less adjustment to accommodate a wide range of operator preferences. Bagian bagian componet forklift terdiri dari Mesin, Transmisi, roda depan, roda belakang, rem, hydraulic, steer, mast dll

Foot-Activated Parking Brake (Powershift models)

The operator simply depresses the parking brake pedal to set it without changing operating position. A conveniently located handle is used to release it.

Rear-Pillar Assist Grip / Swivel Seat

The seat swivels to the right to facilitate operation in reverse.

however, The seat also swivels to the left to make it easier to enter and exit the forklift. An optionally available rear-pillar assist grip with a horn button enhances comfort by offering easy horn operation while traveling in reverse