TCM Pallet Stacker SRO200 | 2 ton

Description

TCM Pallet Stacker SRO200 | 2 ton

The TCM SRO200 (often referenced in newer catalogs as the SRO20-N2) is a heavy-duty, stand-in pallet stacker designed for high-intensity warehouse operations.
Its primary advantage is its compact “stand-in” design, which allows for a significantly smaller footprint (AST) compared to traditional ride-on or pedestrian stackers.

Below are the technical specifications for the 2-ton model:

Core Specifications

Feature Specification.
Load Capacity 2,000 kg (2.0 Ton).
Load Center 600 mm.
Power Source Electric (AC Drive Motor).
Operator Type Stand-in (Protected cabin).
Battery Voltage 24V.
Travel Speed 9.0 km/h (Loaded/Unloaded).
Standard Truck Width 940 mm.
Turning Radius 1,761 mm.

Performance & Mast Options

The SRO series is known for its high reach capabilities for a stacker of this size.
Maximum Lift Height: Up to 7,000 mm (7 meters).
Mast Types: Available in Simplex, Duplex, and Triplex configurations depending on your overhead clearance needs.
Lifting/Lowering: Features a “Combi-controller” lift system for smooth, proportional speed control, which is critical when handling 2-ton loads at height.

Key Features & Ergonomics

Compact Agility: The SRO boasts an Aisle Width (AST) of approximately 2.3 to 2.5 meters, which is roughly 10% smaller than many competitors.
Driver Protection: The operator stands completely inside the chassis, protected by a heavy-duty overhead guard and a wrap-around steel compartment.
Operating Modes: Includes three pre-set.

performance modes:

PRO: For experienced drivers and high-speed cycles.
ECO: Optimized for energy saving.
EASY: Reduced speeds (max 8 km/h) for beginners or sensitive goods.
Steering: 360-degree electronic power steering that adjusts sensitivity based on travel speed for better stability.

Maintenance & Battery

Battery Options: Available with traditional Lead-Acid or Lithium-ion (Li-ion).8 Li-ion is recommended for multi-shift operations due to opportunity charging.
Serviceability: Designed with a shared-parts philosophy across the TCM range, making spare parts (like rollers, sensors, and motors) easier to source and replace.
Note: Dimensions such as total length can vary slightly pending on the fork length (standard is usually 1,150 mm) and whether you choose the SRO20I (Initial Lift version) which provides higher ground clearance for ramps.
Would you like me to compare this model’s turning radius or aisle requirements against a standard reach truck?