Toyota Forklift 8FD40N | 4 ton

Description

Toyota Forklift 8FD40N | 4 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift 8FD40N | 4 ton

The Toyota 8FD40N is a heavy-duty diesel forklift from the 8-Series, designed for a 4.0-ton load capacity. Below are the technical specifications for this unit:

General Specifications

Model: 8FD40N.
Power Type: Diesel.
Load Capacity: 4,000 kg (at 600 mm load center) or 4,500 kg (at 500 mm load center).
Load Center: 600 mm (Standard).
Operator Type: Rider Seated.

Engine & Performance

Engine Model: Toyota 14Z-II (6-cylinder) or Toyota 1KD (in some regions).
Piston Displacement: 5,204 cc (14Z-II).
Rated Power: 56 kW @ 2,100 rpm.
Rated Torque: 269 Nm @ 1,600 rpm.
Travel Speed (Full Load): 22.0 km/h.
Lift Speed (Full Load): 510 mm/sec.
Gradeability (Full Load): 29% – 32% (depending on specific configuration).

Dimensions & Weight

Overall Length (to fork face): 2,980 mm.
Overall Width: 1,350 mm.
Overhead Guard Height: 2,210 mm.
Turning Radius (Outside): 2,660 mm.
Ground Clearance (Full Load): 120 mm (under mast).
Service Weight: Approx. 6,150 kg – 6,170 kg.

Mast & Forks

Standard Lift Height: 3,000 mm (V-Mast).
Mast Lowered Height: 2,110 mm.
Mast Extended Height (with backrest): 4,270 mm.
Tilt Angle (Forward/Backward): 6° / 12°.
Standard Fork Dimensions: 50 mm x 150 mm x 1,070 mm.

Wheels & Tires

Tires: Pneumatic (Standard) or Solid/Cushion (Optional).
Tire Size (Front): 250-15-16PR.
Tire Size (Rear): 7.00-12-12PR.
Wheelbase: 1,900 mm.

Key Safety Features

SAS (System of Active Stability): Electronically controls forklift stability to reduce the risk of accidents during turning or load handling.
OPS (Operator Presence Sensing): Disables travel and hydraulic functions if the operator is not seated correctly.

Main Specification, Toyota Forklift 8FD40N | 4 ton

{ Model : 8FD40N } | { Engine Model : 14Z-II} | { Load Capacity ; 4000 kg } | { Load Center : 500 mm } | { Overall Width A : 1045 mm } | { Turning Radius(outside) B : 2,610 mm } | { Overhead Guard  Height C : 2080 mm } | { Length to Fork Face D : 2245 mm}.

Engine Specifications

{ Model : Toyota 14Z-II } | { Piston Displacement : 2486 cc } { Rated Horsepower/r.p.m. : 38/2,400 (41/2,500) kw } | { Rated Torque/r.p.m : 157/2,300 (157/2,500) kw }

The Mastery of True Potential

In this paragraph, Mastery of any undertaking can only be achieved if there is true potential and unwavering dedication to excellence. To Toyota, the 8 Series is the proud culmination of 50 years in the pursuit of mastery in the development and manufacture of forklifts.

Outstanding Comfort and Visibility

The 8 Series provides the comfort and visibility for long hours of efficient operation.

Efficiency-Boosting Operability

Secondly, The operator’s compartment is carefully designed to ensure maximum forklift control from minimum operator effort.

Top-Class Stability

however, Toyota’s System of Active Stability (SAS), Operator Presence Sensing (OPS) system and Travel and Load Handling Control provide innovative, high-tech stability to the 8 Series.

Environmental Friendliness

Low noise and exhaust emissions make the 8 Series environmentally friendly.

Built-in Reliability and Serviceability

Thirdly, Designed to be tough and easy to maintain.

True Potential Through Outstanding Comfort and Visibility

most importantly, Comfort is a Toyota tradition. With the 8 Series, it starts from the time you enter. Grab the large assist grip, place your foot on the wide, low step and slide into the operator’s seat that provides comfort, support and retention.

Once you have been seated and wrapped your hands around the small- diameter steering wheel you will intuitively feel that everything you need for operating the forklift is within natural reach.

You will also instantly realize that you have a clear view of the forks and load. This comfort sets the stage for reaching the true potential of the forklift from Toyota.

Easy Entry and Exit

Moreover, A large assist grip, A deep, wide step and a spacious opening team up for easy entry onto the forklift.

Comfort and Support ORS* Seat

In conclusion, The ORS seat can be adjusted 150 mm forward and backward to provide comfort and support to almost all sizes of operators. *ORS: Operator Restraint System.

Outstanding Visibility

The overhead guard, mast and instrument panel have been designed to provide excellent visibility of the fork tips at the most frequently used lift heights.

Wide Floor Space

The spacious floor area enables a more relaxed operating position that contributes to comfort.

True Potential Through Outstanding Operability

Toyota used the latest technology to reexamine forklift operation in its search for enhanced operability. Motion-capture technology monitored every aspect of operator movement looking for ways to make operation more efficient.

Based on these findings, well-thought-out design changes were combined to make the 8 Series ready to transform every action of the operator into smooth and efficient operation.

Operator-Friendly Steering Wheel

The small-diameter steering wheel teams up with the full hydraulic power steering system to provide excellent maneuverability. The steering column offers step-less adjustment to accommodate a wide range of operator preferences.

Bagian bagian componet forklift terdiri dari Mesin, Transmisi, roda depan, roda belakang, rem, hydraulic, steer, mast dll

Foot-Activated Parking Brake (Powershift models)

The operator simply depresses the parking brake pedal to set it without changing operating position. A conveniently located handle is used to release it.

Rear-Pillar Assist Grip / Swivel Seat

The seat swivels to the right to facilitate operation in reverse. The seat also swivels to the left to make it easier to enter and exit the forklift. An optionally available rear-pillar assist grip with a horn button enhances comfort by offering easy horn operation while traveling in reverse