Heli Electric Reach CQD18X1 | 1.8 ton

Description

Heli Electric Reach CQD18X1 | 1.8 ton

The Heli CQD18X1 is a high-performance, electric stand-on reach truck from the G2 Series, specifically designed for narrow-aisle warehouse operations.
It features a 1.8-ton (4,000 lbs) lifting capacity and typically utilizes advanced Lithium-Ion technology for efficiency and multi-shift capability.
Below are the primary technical specifications for the Heli CQD18X1 (GB2R/GB2RLI configurations):

Technical Specifications

Model Heli CQD18X1.
Rated Capacity 1,800 kg (4,000 lbs).
Load Center 600 mm (24 in).
Power Type Electric (Lithium-Ion or Lead Acid options).
Operator Type Stand-on / Narrow Aisle.
Standard Lift Height 5,330 mm (approx. 210 in) — can vary by mast.
Max Lift Height Up to 10.5 meters (depending on mast choice).
Battery Voltage 48V (standard) or 36V options.
Drive Control ZAPI AC Controller.

Performance & Maneuverability

Travel Speed: ~6.5 km/h (loaded) to 7.3 km/h (unloaded).
Turning Radius: Approximately 1,750 mm (69 in), making it ideal for tight racking systems.
Braking Systems: Features five independent braking systems, including regenerative motor braking and an automatic electromagnetic parking brake.
Steering: Electronic Power Steering (EPS) for lightweight and precise control.

Mast & Hydraulics

Mast Type: Standard is a 3-stage full free-lift mast.
Tilt Range: 3° forward and 4° backward for better load stability.
Side Shift: Integrated side shifter is standard (typically ±50 mm).
Visibility: Designed with a “Wide View” mast and a beveled overhead guard to maximize operator sightlines when stacking at high levels.

Operator Comfort & Safety

Ergonomics: Includes a multifunction joystick for proportional hydraulic control and a suspended floor plate to reduce leg fatigue.
Safety Features: Automatic speed reduction during turns, an Operator Presence System (OPS), and an emergency cut-off switch.
Display: Intelligent ZAPI LED/LCD display showing battery status, fault codes, and hour meter.
Note: Performance data can vary slightly depending on whether the unit is equipped with a Lithium-Ion (LI) or Lead Acid battery, as Lithium models often support “opportunity charging” (full charge in ~2 hours).
Would you like me to find the specific Aisle Width (AST) requirements for your pallet size to see if this unit fits your warehouse layout?