Jl. Ketapang Raya Blok DD15/18 Pekayon Bekasi - Indonesia
081286040723
sales@belialat.com

Hangcha Forklift XE80 | 8 ton

Hangcha Forklift XE80 | 8 ton

Feature Specification

Model XE80.
Rated Capacity 8,000 kg (8.0 Ton).
Load Center 600 mm.
Power Source Lithium-ion (LiFePO4).
Nominal Voltage 80V (High-performance system).
Battery Capacity Typically 80V/542Ah or higher (Standard/Large options).
Drive Type Seated / 4-Wheel.
Tire Type Pneumatic (Standard) or Solid (Optional).

Description

Hangcha Forklift XE80 | 8 ton

BELIALAT.COM support penjualan unit, parts, service, rental, maintenance contract, overhaul, reconditioned Hangcha Forklift XE80 | 8 ton

Hangcha Forklift XE80 | 8 ton, Specifications

The Hangcha XE80 is a heavy-duty electric forklift from the XE Series, designed to match the performance of internal combustion (IC) forklifts while utilizing lithium-ion technology.
It is specifically built for heavy-duty applications (8 tons) where high performance, outdoor durability, and zero emissions are required.
Below are the key specifications and features for the Hangcha XE80 (8.0-ton) model:

Feature Specification

Model XE80.
Rated Capacity 8,000 kg (8.0 Ton).
Load Center 600 mm.
Power Source Lithium-ion (LiFePO4).
Nominal Voltage 80V (High-performance system).
Battery Capacity Typically 80V/542Ah or higher (Standard/Large options).
Drive Type Seated / 4-Wheel.
Tire Type Pneumatic (Standard) or Solid (Optional).

Performance & Capabilities

Travel Speed: Up to 18–20 km/h (unladen), designed to compete with diesel-powered trucks.
Lifting Speed: High-efficiency hydraulic systems allow for lifting speeds of approximately 400–450 mm/s (laden).
Gradeability: Capable of handling slopes up to 15%–20% depending on the load condition.
Environmental Rating: IPX4 waterproof rating, making it suitable for operation in heavy rain and across waterlogged outdoor areas.

Key Features

Dual Permanent Magnet Motors: Utilizes a high-torque 80V system that reduces energy consumption by 15–20% compared to traditional asynchronous motors.
Fast Charging: Supports rapid charging (fully charged in ~2 hours) and “opportunity charging” during breaks without damaging the battery.
IC-Chassis Design: Unlike many electric forklifts, the XE80 uses a chassis and steering axle derived from Hangcha’s rugged IC (diesel) forklifts, providing higher ground clearance and better durability on rough terrain.
Climate Ready: Comes standard with an electrical heating module for the battery, ensuring the unit operates efficiently in cold storage or freezing outdoor temperatures (down to -30°C).
Operator Comfort: Features a smart color-screen instrument panel, a low center of gravity for stability, and an ergonomic workstation with an optional electronic parking brake.

Maintenance & Warranty

Battery Life: Rated for 4,000 full charging cycles while maintaining at least 80% residual capacity.
Warranty: Typically carries a 5 to 6-year (or 12,000 hours) warranty on the lithium battery.
Maintenance-Free: No watering, no acid handling, and no engine oil/filter changes required.
Note: Specs like mast height (Duplex vs. Triplex) and specific battery Ah ratings can vary based on the regional configuration.
Would you like me to find a local dealer for pricing or provide a comparison between this model and the high-voltage XH series?

Characteristics

Engine : Electric Lithium Power
Operator Position : Sit on Type
Load Capacity : 8000 Kg

Load Center C : 600 mm
Alternative Capacity Q2 : 1350 mm
Load Distance X : 404 mm
Wheelbase Y : 1400 mm

Weight

Service Weight : 2550 mm
Axle Loading/Loaded/Front : 3530 kg
Loading/Loaded/Rear : 520 kg

Axle Loading/Unloaded/Front : 1035 kg
Axle Loading/Unloaded/Rear : 1515 kg

Dimensions

Tilting Angle α/β Forward/Backward degree : 6/10
accordingly Mast Height, Lowered h1 2-stage Mast : 1995 mm
Std Free Lift h2 2-stage std. Mast,From Ground : 140 mm
Std. Lift Height h3 2-stage Std. Mast,
From Ground : 3000 mm

MastHeight, Extended h4 2-stage. Mast : 3955 mm
above all Heigt, Overhead Guard h6 : 2070 mm
Length, with std. forks L1 : 3160 mm

Length, to forks Face L2 : 2240 mm
Width, at Tyre b1 Single : 1070 mm
Forks s/e/l Thicness x Width x Length : 35 x 100 x 920 mm

additionally Fork Carriage Class ISO 2328, Type A/B/no : Class 2,A mm
Width, Fork Carriage b2 : 970 mm
Ground Clereance m1 Under Mast : 120 mm

Ground Clereance m2 at Center of Wheelbase : 130 mm
Right Angle Stacking Aisle Ast with L1000x W800 Pallet : 3560 mm
Turning Radius Wa : 1955 mm

Performance

Travel Speed (FWD) Loaded 1st/2nd : 18.5 km/h
Travel Speed (FWD) Unloaded 1st/2nd : 19.0 km/h
Lifting Speed Loaded : 620 mm/s } | { Lifting Speed Unloaded : 670 mm/s

after all Lowering Speed Loaded : 500 mm/s
Lowering Speed Unloaded : 550 mm/s
Max. Drawbar Pull Loaded : 13 KN

Max. Gradeability Loaded % : 33 %
afterward Service Brake Operation/Control : Foot/Hydraulic
Parking Brake Operation/Control : Hand/Mechanical

Steering Type : FHPS
Battery Voltage/ Capacity at 5-hour rating V/ah : 12/64 Volt/ah

Tyre

size, front ( standard tread ) : 6.9-9-10PR
size, rear : 5.0-8-8PR

Dual tyre

Tread front ( dual tread ) : 1000 mm
Overall width : 1190 mm
Service weight ( dual tread ) :2690 kg

Reviews

There are no reviews yet.

Be the first to review “Hangcha Forklift XE80 | 8 ton”

Your email address will not be published. Required fields are marked *