Hangcha Order Picker A250 | 2.5 ton

Description

Hangcha Order Picker A250 | 2.5 ton

The Hangcha A250 typically refers to the A Series Low-Level Order Picker with a 2.5-ton (2,500 kg) capacity.
This model is designed for high-efficiency horizontal transport and first-level picking in large warehouses.
Below are the primary technical specifications and features for the A Series 2.5t model:

Feature Specification

Model Series A Series Low-Level Order Picker.
Load Capacity 2,500 kg (2.5 Ton).

Load Center 600 mm / 1,200 mm (varies by fork length).
Max. Travel Speed Up to 10 km/h (unladen) / 7–9 km/h (laden).

Lifting Height ~125 mm (Standard pallet lift).
Fork Lengths 1,150 mm / 1,220 mm / 2,350 mm (Long fork options available).

Battery Type Lead-acid (Standard) or Lithium-ion (Optional).
Drive Motor AC Brushless (High-performance).

Key Technical Features

Performance: Equipped with a CURTIS AC Control System, providing precise speed control and regenerative braking (which recharges the battery during deceleration).

Efficiency: The “wedge” chassis design allows for better maneuverability in narrow aisles.3 High-speed travel (up to 10 km/h) reduces cycle times between picking stations.

Operator Comfort:

Spacious operator platform with a low step-in height.
Shock-absorbing floor pedals to reduce fatigue during long shifts.
Ergonomic tiller head with controls accessible by both hands.

Safety:

Automatic Speed Reduction: Automatically slows down when turning to prevent tipping.
Safety Pedal: The truck only operates when the operator is standing firmly on the platform.
Emergency Power-off: Easily accessible emergency button.

Maintenance & Battery

Lithium-ion Advantage: If equipped with the Li-Ion package (common in newer units), it supports opportunity charging (100% charge in ~2 hours), allowing it to run across multiple shifts without battery swaps.
Easy Access: The rear cover can be removed without specialized tools, providing direct access to the AC motor, controller, and hydraulic pump for quick servicing.

Common Model Variants

CJD25-AC2-L: The standard code for the A Series 2.5t order picker.
Fork Version: Often used to carry two or three pallets simultaneously (up to 3.7m fork length options in some regions).
Would you like me to find the specific dimensions (aisle width requirements) or a comparison with the X-Series version?