TCM Skid Loader SSL711 | 840 kg

Description

TCM Skid Loader SSL711 | 840 kg

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned TCM Skid Loader SSL711 | 840 kg

Specification Unit TCM Skid Loader SSL711 | 840 kg

Characteristics

Manufacturer : UNICARRIERS
Model designation : SSL 711
Type : Front end type
Power unit : Diesel engine
Operation : Seated

Performance

Bucket capacity Heaped m3 : 0.40
Capacity Struck m3 : 0.31.

Rated opearating capacity kg : 840
Tipping load kg : 1690.

Hydraulic cycle time Raise(w/rated load) sec : 5.2
Cycle time Dump sec : 2.9
Cycle time Lower(empty) sec : 4.0.

Travel speed Forward km/h : 10.0
Speed Reverse km/h : 10.0.

Maximum traction force(w/rated load) kN : 29.4
Greadeability unloaded deg : 26.
Loaded deg : 30.

Min.turning radius,front with std bucket mm A : 2400
Min.turning radius, rear mm : 1420

Dimensions & weight

Overall length,bucket on ground mm B : 3330
Overall width Loader body mm D : 1680
Overall width Bucket std mm C : 1750.

Wheel base mm F : 1040
Front overhang, bucket on ground mm J : 1390
Rear overhang mm K : 900.

Tread front/ rear mm G : 1345/1345
Overall height at CAB mm E : 1995/2025
Overall operating height mm : 4010.

Height to hinge pin(fully raised) mm : 3120
Dumping clearance, max. height, full dump position mm H : 2400
Dumping reach max. height,full dump position mm I : 680.

Rollback angle(at carry position) deg : 37
Dump angle(max.) deg. : 40
Ground clearance mm : 220.

Drawbar height mm : 260
Service weight kg : 3340/3410

Engine & electrical system

Make : Kubota
Model : V3300
Type : 4 cycle, water cooled.

Displacement lit : 3318
Number of cylinders : 4
Bore x stroke mm : 9.8 x 110.0.

Rated output : 47.8kW/ 2500rpm
Maximum torque : 220.1N.m/ 1400rpm
Air-cleaner : Dry cyclon type.

Fuel inj. pump : Plunger type
Lubricating oil fi lter : Full fl ow / Spin-on cartridge
Alternator : AC 0.54kW, 12V
Starter motor : 12V – 3.0kW
Battery : 1 x 12V/ 64AH/5h

Power train

Type : Hydraulic drive
HST pump type : Variable capacity, axial piston pump
HST pump capacity cc/rev : 0～45.9.

HST motor type : Constant capacity, trochoid motor
HST motor capacity cc/rev : 195
Reduction : Gear & chain single reduction

Axles & wheels

Drive system : 4-wheel drive
Axles Front / Rear : Frame fi xed / semi-fl oating
Tyres Front/Rear 4pcs : 12-16.5-8PR
Tyres type : Traction lug

Brake & steering

Brake system service : HST motor shaft braking, multiple wet disc
Brake sytem parking : Service brake pedal locking
Steering system : Skid-steering, independent RH/LH wheels

Loading & hydraulic

Loading mechanism & linkage : Hyd.automatic bucket leveling system
Boom cylinder(bore x stroke mm) 2pcs : 63 x 853
Bucket cylinder(bore x stroke mm) 2pcs : 63 x 512

Main pump type : Gear pump
Main pump Displacement cc/rev. : 27.8
Charging pump Type : Gear pump
Charging pump Displacement cc/rev. : 22.9
Main control valve Set relief press. Mpa : 16.7

Noise level

Operator’s ear at max.governor speed dB(A) ; –
Normal travelling mode dB(A) : –