Genset Perkins 15 kVA

Description

Genset Perkins 15 kVA
BELIALAT.COM support penjualan unit, parts, service, rental, maintenance contract, overhaul, reconditioned Genset Perkins 15 kVA

Specifications

Power Output:
– Standby Power Rating: 15 kVA / 12 kW
– Prime Power Rating: 13.5 kVA / 10.8 kW
Engine:
– Model: Perkins 404D-15 or similar
– Governor: Electronic
– Speed: 1500 rpm
Alternator:
– Manufacturer: Leroy Somer or Stamford
– Voltage and Frequency:
– Voltage: 400V
– Frequency: 50Hz
Control Panel:
– Model: Deep Sea DSE7320 or similar
Fuel Consumption:
– Approximately 0.8-2.5 liters per hour at 100% load (may vary depending on configuration)
Dimensions and Weight:
– Dimensions: approximately 220 x 120 x 220 mm (may vary depending on configuration)
– Weight: approximately 20-40 kg (may vary depending on configuration)
Fuel Tank Capacity:
– Varies depending on configuration (approximately 2-4 liters)
Noise Level:
– Varies depending on configuration (approximately 2-5 dB(A) at 7m)
Warranty:
– Varies depending on manufacturer and dealer (typically 1-2 years or 1000-2000 hours)

These specifications may vary depending on the configuration and application of the genset. It’s always best to consult the manufacturer or authorized dealer for the most accurate and up-to-date information.

Total Power

Gross Mechanical Output : 12.6-14 kWm
Typical Electrical Output : 13.5-15.1 kVA
Rated Speed : 1800 rpm

Emission Standards

Emissions : U.S EPA Tier 4 Final

50 Hz Typical Electrical Output

Prime : 10.8 kWe
Standby : 12.1 kWe

General

Number of Cylinders : 3 inline
Bore : 84 mm
Stroke : 90 mm
Displacement 1.5 l
Compression Ratio : 22.5:1
Aspiration : Naturally aspirated
Combustion System : Mechanical indirect injection
Rotation from Flywheel End : Anti-clockwise
Cooling System : Watercooled
Aftertreatment –
Typical Alternator : Efficiency 88%
Switchable : No

Electropak Dimensions

Length : 805 mm
Width : 473 mm
Height : 793 mm
Dry Weight : 197 kg

Disclaimer

Note 1 *Final dimensions dependent on selected options

Definitions
Prime Power : Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power : Power available at variable load in the event of a main power network failure. No overload is permitted.