Paper Roll Clamp

Description

Paper Roll Clamp

BELIALAT.COM support penjualan unit, parts, service, rental, maintenance contract, overhaul, reconditioned Paper Roll Clamp.

A Full Rotating Paper Roll Clamp is a forklift attachment designed to handle, transport, and stack cylindrical paper rolls with precision.
The “Full Rotating” designation refers to its continuous 360° rotation capability, which allows operators to pick up rolls from either a vertical or horizontal position and rotate them as needed for stacking or loading onto printing presses.

Core Technical Specifications

While exact specs vary by manufacturer (e.g., Cascade, Bolzoni Auramo, Kaup), most standard units fall within these ranges:
Feature Typical Specification Range;
Rotation 360° Continuous (both directions).
Load Capacity 1,000 kg – 4,500 kg (Standard models).
Roll Diameter Range 250 mm – 1,800 mm (10″ – 72″).
Mounting Class ISO/ITA Class II, III, or IV.
Hydraulic Functions 2 Functions (Clamp/Unclamp and Rotate).
Operating Pressure 140 – 175 bar (Approx. 2,000 – 2,500 PSI).
Weight 400 kg – 1,500 kg+ (depending on capacity).

Key Components & Features

Clamping Arms.
Fixed Short Arm: Used for standard operations where roll sizes are consistent.
Positionable Short Arm: Can be adjusted to maintain a thinner profile when handling smaller rolls, which is critical for “knifing” between tightly stacked rolls in containers.
Split Long Arm: Allows the clamp to handle two rolls of slightly different diameters simultaneously.

Contact Pads

The pads are the only part of the attachment that touches the paper. Choosing the right pad is essential to prevent “tapering” or “telescoping” of the roll.
Rubber-Faced: High friction, general-purpose for most paper types.
Urethane-Faced: High durability and non-marking.
Cast/Grit Surface: Used for heavy-duty kraft paper or linerboard.

Safety Mechanisms

Pressure Relief Valves: Prevents over-clamping, which can crush the paper core or deform the roll.
Check Valves: Maintains clamping pressure even if a hydraulic hose fails during transport.
Important Considerations for Selection.
When specifying a unit, you must calculate the Residual Capacity of your forklift.9 Because the clamp is heavy and moves the load center forward, the forklift’s original lifting capacity will be significantly reduced.

Typical Options to Include:

Electronic Rotational Control: Stops the rotation precisely at 90° or 180° for perfect vertical/horizontal alignment.
Adaptive Force Control (AFC): Automatically adjusts clamping pressure based on the weight of the roll to prevent damage.
LED Indicators: Visual cues for the operator to confirm the clamp is at the correct angle.
Would you like me to find a specific model recommendation based on the weight and diameter of the rolls you are handling?