Caterpillar Forklift DP45N | 4.5 ton

Description

Caterpillar Forklift DP45N | 4.5 ton

The Caterpillar DP45N is a heavy-duty diesel forklift designed for high-capacity lifting in demanding environments like ports, construction sites, and timber yards.
Below are the key specifications for the 4.5-ton (4,500 kg) model.

General Specifications

Feature Specification.
Model DP45N.
Power Source Diesel.
Rated Capacity 4,500 kg (4.5 Tons).
Load Center 500 mm.
Operator Type Seated.
Tire Type Pneumatic (Standard).

Engine & Performance

The DP45N typically uses the industrial-strength Mitsubishi S6S or the newer D04EG-T engine, depending on the production year and regional emission standards.
Engine Model: Mitsubishi S6S (6-Cylinder) or D04EG-T (4-Cylinder Turbo).
Rated Power: ~57.5 kW @ 2,300 rpm.
Travel Speed (Loaded/Unloaded): 21.5 / 22.5 km/h.
Lift Speed (Loaded/Unloaded): 0.55 / 0.61 m/s.
Gradeability (Loaded): ~24% to 29%.
Transmission: Automatic Powershift (2 Forward / 1 Reverse).

Dimensions & Weight

Service Weight: ~6,210 kg to 6,330 kg.
Overall Width: 1,460 mm (Standard) | 1,965 mm (with optional dual tires).
Length to Fork Face: 3,130 mm.
Overhead Guard Height: 2,296 mm.
Turning Radius (Outside): 2,730 mm.
Standard Fork Size: 50 x 150 x 1,220 mm.

Mast & Lifting

Standard Max Lift Height: 3,300 mm (Simplex mast).
Extended Height: Approx. 4,570 mm.
Tilt Angle (Forward/Backward): 6° / 10°.
Free Lift: 150 mm (Standard).

Key Features

PDS / PDS+ (Presence Detection System):12 Automatically locks hydraulic and drive functions if the operator leaves the seat.
Soft Landing System: Protects loads by slowing the forks automatically as they approach the ground.
Maintenance: Features a rear-hinged engine hood and 500-hour service intervals for reduced downtime.
Note: Specifications can vary slightly based on the specific mast configuration (Simplex, Duplex, or Triplex) and optional attachments (side shifters, fork positioners, etc.).
Would you like me to find a digital manual or a brochure for this specific model?