Heli Forklift CPCD25 | 2.5 ton
Heli Forklift CPCD25 | 2.5 ton
Technical Specifications
Rated Capacity 2,500 kg (2.5 Tons).
Load Center 500 mm.
Power Type Diesel.
Standard Lift Height 3,000 mm (3 Meters).
Free Lift Height 160 mm (Standard Mast).
Mast Tilt (Fwd/Bwd) 6 circ / 12 circ.
Turning Radius (Outside) 2,240 mm.
Service Weight Approx. 3,680 – 3,800 kg.
Description
Heli Forklift CPCD25 | 2.5 ton
The Heli CPCD25 is one of the most widely used 2.5-ton diesel forklifts globally, known for its balance of durability and cost-efficiency.
It is commonly part of the H2000, K2, or the newer H3 and G3 series.
Below are the general specifications for the standard unit (H2000/K2 series).
Technical Specifications
Rated Capacity 2,500 kg (2.5 Tons).
Load Center 500 mm.
Power Type Diesel.
Standard Lift Height 3,000 mm (3 Meters).
Free Lift Height 160 mm (Standard Mast).
Mast Tilt (Fwd/Bwd) 6 circ / 12 circ.
Turning Radius (Outside) 2,240 mm.
Service Weight Approx. 3,680 – 3,800 kg.
Engine & Performance
Depending on the specific region or series, the CPCD25 typically uses one of three high-reliability engines:
Engine Options:
Isuzu C240: The “gold standard” for reliability in Asian markets.
Mitsubishi S4S: Known for high torque and smooth operation.
Kubota V2403: Common in newer European/North American (Stage V) compliant models.
Travel Speed: 17 – 19 km/h (Unladen).
Lift Speed: 450 – 550 mm/s (Laden/Unladen).
Gradeability: 20% (Laden).
Dimensions
Overall Width: 1,150 mm.
Length (to fork face): 2,550 mm.
Overhead Guard Height: 2,070 mm.
Mast Lowered Height: 1,995 mm (Standard 3m mast).
Fork Size: 1,070 mm x 122 mm x 40 mm (Standard).
Key Features
Transmission: Automatic (Powershift) or Manual options.
Visibility: “Wide-view” mast design significantly reduces blind spots for the operator.
Ergonomics: Suspended overhead guard to reduce vibration and a spacious footwell.
Hydraulics: Equipped with a damping valve to prevent the forks from crashing into the ground when lowering.
Note: These specs refer to the standard pneumatic tire model. If you are looking at the Rough Terrain version (CPCD25-W1/KU), the dimensions and ground clearance will be significantly higher (approx. 270mm-280mm clearance).
Would you like me to find the specific part numbers for the filters (oil/fuel/air) for a specific engine type, or help you compare this against a Toyota or Hangcha equivalent?


Reviews
There are no reviews yet.