Liugong Bulldozer 160C | 17 ton

Description

Liugong Bulldozer 160C | 17 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Liugong Bulldozer 160C | 17 ton

Liugong Bulldozer 160C | 17 ton, Specifications unit

Engine

Operating weight 17000 kg
Engine power 131 kW (176hp) @ 1850 rpm
Max travel speed, fwd 9.72 km/h
Max travel speed, rev 12.64 km/h
No. of speeds, fwd 3
No. of speeds, rev 3
Referenced Shoe width 510 mm
Ground pressure 67 kPa
Blade type Straight
Blade capacity 4.5 m³
Depth below ground 540 mm
Lift above ground 1076 mm
Blade angle 7 °
Blade tilt 440/470 mm
Transport length 5180 mm
Transport width 3422 mm
Transport height 3200 mm
Model Weichai
Emission Stage II / Stage III
Ripper options Three-shank ripper
Hydraulic winch options Yes
Blade options Straight; Angle; Full-U; Landfill blade

Transmission

Type : Heat exchange
Core size : 0.54 m2

Electrical System

Alternator : 65 amps
Battery : 2X12 V in series, maintenance free, 750 A CCA at -18°

Powertrain

Dual path hydrostatic
Pump : Variable axial piston
Motor : Variable bent axis piston

Max. drawbar pull : 214 kN
Transmission : Single lever control electronic tracking
Oil filter : 4 micron, spin-on, replaceable

Travel speeds
Forward : 0-9.7 km/h
Reverse : 0-9.7 km/h

SAHR parking brake
(Spring applied hydraulically released)
Steering brakes : Hydrostatic

Oil Final drive : 2 helical gear reductions to
planetary reduction
Reduction ratio : 61.4:1

Hydraulic Group

Pump Flow@2200 RPM : 132 L/min
Max Pressure : 207 bar
Lift cylinder PAT : nr.2

Bore diameter : 108 mm
Rod diameter : 50.8 mm
Stroke : 445 mm

Angle cylinder PAT : nr.2
Bore diameter : 127 mm
Rod diameter : 63.5 mm

Stroke : 381 mm
Tilt cylinder PAT : nr.1
Bore diameter : 127 mm
Rod diameter : 63.5 mm
Stroke : 120 mm

Blade

Variable blade pitch – adjustable : 55° to 60°
Lift speed – per second : 483 mm
Cutting edge : Reversible, replaceble

Width : 200 mm
Length : 2158 mm
Thickness : 19.1 mm;

Track On Ground

Shoe width : 508 mm
Tracks on ground : 26323 cm2

Undercarriage

Track adjustment : Grease injection
Hydraulic frame : Two-tier chassis,
manufactured in structural steel

Track link pitch : 175.4 mm
Track shoe height : 51 mm
Pin diameter : 36.6 mm

Bushing diameter : 62 mm
Track shoes per side : 43
Track rollers per side : 7

Carrier rollers per side : 2
Track roller rail diameter : 190 mm

Ripper

Max. penetration : 478 mm
Width : 1712 mm
Cut width : 1636 mm

Max. ground clearance : 424 mm
Max. number of shanks : 3
Tooth spacing w/3 teeth : 785 mm

Hydraulic cylinder : Double-acting
Diameter : 102 mm
Stroke : 254 mm
Rod : 51 mm

Service Capacity

Fuel tank : 300 L
Engine oil w/filter : 16.4 L
Engine oil w/o filter : 15.6 L

Engine cooling system : 25.5 L
Hydraulic reservoir : 98.4 L
Final drive – per side : 14.2 L

Track rollers – each : 0.330 L
Front idlers – each : 0.460 L
Carrier rollers – each : 0.275 L