Toyota Forklift 32-8FGK30 | 3 ton

Description

Toyota Forklift 32-8FGK30 | 3 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift 32-8FGK30 | 3 ton

The Toyota 32-8FGK30 is a compact version of the 3-ton 8-Series forklift, designed for better maneuverability in tight spaces compared to the standard 8FG30 model.
Below are the technical specifications for this unit:

Main Vehicle Specifications

Model: 32-8FGK30 (Gasoline/LPG – Compact Model).
Load Capacity: 3,000 kg (3 Ton).
Load Center: 500 mm.
Power Type: Gasoline / LPG.
Operator Position: Rider Seated.
Tire Type: Pneumatic (Standard) or Solid/Cushion (Optional).

Dimensions & Maneuverability

The “K” in the model name indicates a shorter chassis, resulting in a tighter turning radius than the standard model.
Overall Width: 1,255 mm.
Length to Fork Face: 2,520 mm.
Turning Radius (Outside): 2,130 mm (Standard 8FG30 is 2,430 mm).
Overhead Guard Height: 2,085 mm.
Wheelbase: 1,485 mm.
Ground Clearance (Full Load): 100 mm (at mast).

Engine Performance

Engine Model: Toyota 4Y.
Type: 4-Cylinder, In-line, OHV.
Piston Displacement: 2,237 cc.
Rated Horsepower: 43 kW / 2,600 r.p.m.
Rated Torque: 162 N-m / 1,800 r.p.m.
Fuel Tank Capacity: 60 Liters.

Operating Performance

Lifting Speed (Full Load): 445 mm/sec.
Lowering Speed (Full Load): 460 mm/sec.
Max. Drawbar Pull (Full Load): 17,000 N (1,730 kg).
Max. Gradeability (Full Load): 24%.

Key Features

System of Active Stability (SAS): Controls mast tilt and stabilizes the rear axle during turns to prevent tip-overs.

Operator Presence Sensing (OPS): Disables travel and load-handling functions if the operator is not in the seat.
Compact Chassis: Specifically engineered for high-capacity lifting in narrow aisles or confined warehouse environments.

Toyota Forklift 32-8FGK30 | 3 ton, Main Specification

{ Model : 32-8FGK30 } | { Engine Model : 4Y } | { Load Capacity ; 3000 kg } | { Load Center : 500 mm } | { Overall Width A : 1045 mm } | { Turning Radius(outside) B : 1910 mm } | { Overhead Guard  Height C : 2080 mm } | { Length to Fork Face D : 2245 mm}.

Engine Specifications

{ Model : Toyota 4Y } | { Piston Displacement : 2486 cc } { Rated Horsepower/r.p.m. : 38/2,400 (41/2,500) kw } | { Rated Torque/r.p.m : 157/2,300 (157/2,500) kw }

The Mastery of True Potential

In this paragraph, Mastery of any undertaking can only be achieved if there is true potential and unwavering dedication to excellence. To Toyota, the 8 Series is the proud culmination of 50 years in the pursuit of mastery in the development and manufacture of forklifts.

Outstanding Comfort and Visibility

The 8 Series provides the comfort and visibility for long hours of efficient operation.

Efficiency-Boosting Operability

Secondly, The operator’s compartment is carefully designed to ensure maximum forklift control from minimum operator effort.

Top-Class Stability

however, Toyota’s System of Active Stability (SAS), Operator Presence Sensing (OPS) system and Travel and Load Handling Control provide innovative, high-tech stability to the 8 Series.

Environmental Friendliness

Low noise and exhaust emissions make the 8 Series environmentally friendly.

Built-in Reliability and Serviceability

Thirdly, Designed to be tough and easy to maintain.

True Potential Through Outstanding Comfort and Visibility

most importantly, Comfort is a Toyota tradition. With the 8 Series, it starts from the time you enter. Grab the large assist grip, place your foot on the wide, low step and slide into the operator’s seat that provides comfort, support and retention. Once you have been seated and wrapped your hands around the small- diameter steering wheel you will intuitively feel that everything you need for operating the forklift is within natural reach. You will also instantly realize that you have a clear view of the forks and load. This comfort sets the stage for reaching the true potential of the forklift from Toyota.

Easy Entry and Exit

Moreover, A large assist grip, A deep, wide step and a spacious opening team up for easy entry onto the forklift.

Comfort and Support ORS* Seat

In conclusion, The ORS seat can be adjusted 150 mm forward and backward to provide comfort and support to almost all sizes of operators. *ORS: Operator Restraint System.

Outstanding Visibility

The overhead guard, mast and instrument panel have been designed to provide excellent visibility of the fork tips at the most frequently used lift heights.

Wide Floor Space

The spacious floor area enables a more relaxed operating position that contributes to comfort.

True Potential Through Outstanding Operability

Toyota used the latest technology to reexamine forklift operation in its search for enhanced operability. Motion-capture technology monitored every aspect of operator movement looking for ways to make operation more efficient. Based on these findings, well-thought-out design changes were combined to make the 8 Series ready to transform every action of the operator into smooth and efficient operation.

Operator-Friendly Steering Wheel

The small-diameter steering wheel teams up with the full hydraulic power steering system to provide excellent maneuverability. The steering column offers step-less adjustment to accommodate a wide range of operator preferences. Bagian bagian componet forklift terdiri dari Mesin, Transmisi, roda depan, roda belakang, rem, hydraulic, steer, mast dll

Foot-Activated Parking Brake (Powershift models)

The operator simply depresses the parking brake pedal to set it without changing operating position. A conveniently located handle is used to release it.

Rear-Pillar Assist Grip / Swivel Seat

The seat swivels to the right to facilitate operation in reverse. The seat also swivels to the left to make it easier to enter and exit the forklift. An optionally available rear-pillar assist grip with a horn button enhances comfort by offering easy horn operation while traveling in reverse