Toyota Pallet Mover 8410-FRE80L | 3.6 ton

Description

Toyota Pallet Mover 8410-FRE80L | 3.6 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Pallet Mover 8410-FRE80L | 3.6 ton

The Toyota 8410-FRE80L is a heavy-duty electric end rider pallet truck designed for high-throughput environments such as docks, manufacturing plants, and large warehouses.
This model is specifically engineered for horizontal transport and low-level order picking.

Core Performance Specifications

Model: 8410-FRE80L (8-Series).
Load Capacity: 8,000 lbs (approximately 3,629 kg / 3.6 tons).
Power System: 24-Volt electric (AC Drive Motor).
Operator Position: Stand-up / End Rider.
Travel Speed (Unloaded): Up to 9.0 mph (14.5 km/h).
Travel Speed (Loaded): Up to 6.2 mph (10.0 km/h).
Lift Time: 4 seconds (unloaded) / 5.4 seconds (loaded).

Physical Dimensions & Capacity

Lift Height: Approximately 9.25 to 9.75 inches (235–247 mm).
Lowered Fork Height: 3.25 inches (83 mm) at the tip.
Operator Platform Height: 9.6 inches (244 mm) step-height.
Aisle Width (Minimum): Typically requires 124.8 inches (3,170 mm) for a 90° turn with a standard load.
Fork Options: Available in multiple lengths and widths (Single, Double, or Triple fork configurations).

Battery & Electrical

Battery Compartment Size: 31 x 13.25 x 31 inches (787 x 337 x 787 mm).
Max Battery Weight: 1,500 lbs (680 kg).
Connector Type: SB-175 (Gray).
Drive Motor: Uses the ACR System (AC technology) for quicker acceleration and smoother direction changes compared to DC systems.

Key Operational Features

PowerSteer: An electronic steering system that reduces steering effort by up to 90%, assisting significantly during low-speed maneuvers.
Lift and Go™: A programmable feature that limits travel speed if the forks are not fully raised, reducing wear on the undercarriage and load wheels when crossing dock plates.
Ductile Iron Undercarriage: Built with heavy-duty bell cranks and 2-inch diameter pull rods for increased structural durability under maximum loads.
Ergonomics: Features a 12-degree angled control handle to keep the operator’s wrist in a neutral position, along with a cushioned floor mat and lean pads to reduce fatigue.

Specifications Toyota Pallet Mover 8410-FRE80L | 3.6 ton

Load Capacity  : 3628 kg
Lift Height (mm) : 152
Usage Intensity : Medium
Transport Distance : Short-Medium
Suitable Areas : Warehouses
Operator Position: Standing
Travel Speed, no load (km/h) :14.4
Free Lift (mm) : N/A
Power Type : Lead acid

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.
>Pulau kalimantan : Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan