Toyota Pallet Mover 8910-F80 | 3.6 ton

Description

Toyota Pallet Mover 8910-F80 | 3.6 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Pallet Mover 8910-F80 | 3.6 ton

The Toyota 8910-F80 is an electric end-rider pallet jack designed for high-throughput applications and long-distance horizontal transport within warehouses and distribution centers. The “F80” designation specifically denotes its 8,000 lb (approximately 3.6 ton) load capacity.

Core Specifications Toyota Pallet Mover 8910-F80 | 3.6 ton

Model Number: 8910-F80.
Load Capacity: 8,000 lbs (3,629 kg).
Voltage: 24-Volt (compatible with Lead-Acid or Lithium-Ion power solutions).
Travel Speed (Loaded): 6.2 mph (10 km/h).
Travel Speed (Unloaded): 9.0 mph (14.5 km/h).
Lift Height: Up to 9.25 inches (235 mm).
Lowered Fork Height: 3.25 inches (83 mm).
Step Height: 10 inches (254 mm) — designed for easy entry/exit for operators during picking.

Dimensions & Maneuverability

Overall Width: 36 inches (914 mm) to 40 inches depending on configuration.
Aisle Width (Right Angle Stack): Approximately 106 inches to 137 inches (depending on fork length).
Fork Options: Available in single, double, or triple fork lengths to handle multiple pallets simultaneously.

Key Performance Features

AC Drive System: Uses a brushless AC traction motor for smoother acceleration, higher torque, and reduced maintenance compared to DC motors.
Regenerative Braking: Captures energy during braking to extend battery shift cycles and provides controlled deceleration.
Electric Power Steering: Standard low-effort steering reduces operator fatigue during long shifts.
Poly Torsion Block Casters: Acts as a built-in shock absorber to provide a smoother ride and improve stability when cornering with heavy loads.

Operator Ergonomics & Technology

Multi-Function Handle: Features intuitive controls for lift, lower, and travel that can be operated with either hand.
Lift and Go™ Technology: A programmable feature that limits travel speed until the forks are fully raised, protecting the undercarriage from damage over dock plates.
Operator Compartment Sensor System (OCSS): Uses sensors to ensure the operator is in a proper riding position before allowing full-speed travel.

Optional Configurations

Cold Storage Package: Includes specialized hydraulic oil, stainless steel linkage pins, and greaseable bearings for operation in environments as low as -20°F (-28°C).
Galvanized Chassis: Recommended for highly corrosive environments or wash-down applications.
Integrated Fork Scale: Allows operators to weigh loads as they are lifted, improving efficiency in shipping and receiving.

Specifications Toyota Pallet Mover 8910-F80 | 3.6 ton

Identification
Manufacturer : Toyota
Model : 8910-F80

Drive Electric
Operator type Stand on/pedestrian
Load capacity/rated load Q : 3600 kg
centre c mm 600

distance, centre of support arm wheel to face of fork, fork raised/lowered x mm 913/957
Wheelbase, fork raised/lowered y mm 1362/1406*

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.
>Pulau kalimantan : Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan