Case Wheel Loader 921F | 19.8 ton
Case Wheel Loader 921F | 19.8 ton
Operating Weights & Capacities
-
Operating Weight: ~19,850 kg – 20,068 kg (43,777 lbs / ~19.8 metric tons)
-
Standard Bucket Capacity: 3.1 m³ – 4.0 m³ (4.0 – 4.8 cu yd)
-
Payload Capacity: 7,205 kg (15,884 lbs)
-
Bucket Breakout Force: 17,026 kg (167 kN / 37,543 lbs)
-
Static Tipping Load (Straight): 16,765 kg (36,960 lbs)
-
Static Tipping Load (Full 40° Turn): 14,409 kg (31,766 lbs)
Description
Case Wheel Loader 921F | 19.8 ton
BELIALAT.COM support, unit, parts, service, rental, maintenance contract, overhaul, reconditioned Case Wheel Loader 921F | 19.8 ton
The CASE 921F Wheel Loader (~19.8-ton class) is engineered for heavy aggregate handling, material rehandling, and high-production quarry work. Below are the full unit technical specifications:
Engine & Drivetrain
-
Engine Model: FPT (Fiat Powertrain Technologies) F4HFE613 / N67
-
Engine Type: 6-cylinder, 6.7 L, turbocharged with air-to-air intercooler
-
Gross Power: 255 hp (190 kW) @ 1,800 – 2,000 rpm
-
Net Power: 225 hp (168 kW)
-
Max Torque: 1,300 Nm (958.9 lb-ft) @ 1,300 rpm
-
Emissions Level: Tier 4 Final / Stage IV (Selective Catalytic Reduction – SCR only)
-
Transmission: 4-speed / 5-speed Powershift by ZF with Intelligent Clutch Cut-Off (ICCO)
-
Top Forward Speed: 36 – 40 km/h (22.4 – 25 mph)
-
Differential: Open / Limited Slip / Heavy-duty axles with automatic locking differentials
Operating Weights & Capacities
-
Operating Weight: ~19,850 kg – 20,068 kg (43,777 lbs / ~19.8 metric tons)
-
Standard Bucket Capacity: 3.1 m³ – 4.0 m³ (4.0 – 4.8 cu yd)
-
Payload Capacity: 7,205 kg (15,884 lbs)
-
Bucket Breakout Force: 17,026 kg (167 kN / 37,543 lbs)
-
Static Tipping Load (Straight): 16,765 kg (36,960 lbs)
-
Static Tipping Load (Full 40° Turn): 14,409 kg (31,766 lbs)
Dimensions
-
Overall Length (Bucket on Ground): 7.83 m – 7.99 m (25.7 – 26.2 ft)
-
Width Over Tires: 2.90 m (9.5 ft)
-
Bucket Width: 3.03 m – 3.05 m (10.0 ft)
-
Height to Top of Cab: 3.45 m – 3.47 m (11.4 ft)
-
Wheelbase: 3.35 m (11.0 ft)
-
Ground Clearance: 0.43 m (1.4 ft)
-
Hinge Pin Max Height: 4.12 m – 4.15 m (13.6 ft)
-
Dump Clearance at Max Raise (45°): 2.93 m (9.6 ft)
-
Turning Radius (Outside Bucket): 6.03 m – 6.60 m
Hydraulic System
-
Pump Type: Variable displacement axial piston tandem pump
-
Max Hydraulic Flow: 282 L/min (42.8 gpm) @ 2,000 rpm
-
Max System Pressure: 250 bar (3,625 psi)
-
Hydraulic Cycle Times (Unloaded):
-
Raise: 6.2 seconds
-
Dump: 1.4 seconds
-
Lower: 3.1 seconds
-
Total Cycle Time: 10.7 seconds
-
Fluid Capacities
-
Fuel Tank: 288.0 L (76.1 gal)
-
DEF / AdBlue Tank: 41.3 L – 59.8 L
-
Engine Oil: 13.25 L – 15.1 L
-
Cooling System: 30.0 L (7.9 gal)
-
Hydraulic Tank / System: 91 L (tank) / 200 L (total system)
-
Transmission Fluid: 34.0 L (9.0 gal)


Reviews
There are no reviews yet.