Toyota Forklift 9700-CSR30T | 1.3 ton

Description

Toyota Forklift 9700-CSR30T | 1.3 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift 9700-CSR30T | 1.3 ton

The Toyota 9700-CSR30T (also branded as Raymond 9700-CSR30T due to Toyota Material Handling’s ownership of Raymond) is a high-performance Swing-Reach / Turret Truck designed for Very Narrow Aisle (VNA) warehouse environments.
Here are the technical specifications for this 1.3-ton (3,000 lbs) capacity unit:

Core Specifications Toyota Forklift 9700-CSR30T | 1.3 ton

Model Series: 9700 Series (Swing-Reach).
Load Capacity: 1,361 kg (3,000 lbs) at a 600 mm (24-inch) load center.
Power System: 48-Volt Electric.
Mast Type: 2-Stage Mast (standard configuration).
Maximum Elevated Height: Up to 13,056 mm (approx. 514 inches / 42.8 feet).
Operation Type: Man-up turret truck (the operator rises with the load for better visibility).

Performance Data

Travel Speed: 9.6 km/h (6.0 mph) both loaded and unloaded.
Lift Speed: * Loaded: 0.37 m/s (73 fpm).
Unloaded: 0.43 m/s (85 fpm).
Lowering Speed: 0.41 m/s (81 fpm) both loaded and unloaded.
Aisle Requirements: Can operate in aisles as narrow as 1,676 mm (66 inches) depending on load size.

Dimensions & Weight

Truck Weight (excluding battery): Approximately 6,500 kg – 8,000 kg (varies by mast height).
Battery Compartment Width: 603 mm (23.75 inches).
Max Battery Weight: 1,588 kg (3,500 lbs).
Standard Fork Dimensions: 1,067 x 102 x 45 mm (42 x 4 x 1.75 inches).
Step Height: 406 mm (16 inches) for easy entry.

Key Features

Swing-Reach Articulation: The forks can rotate 180 degrees, allowing the truck to pick from either side of a narrow aisle without turning the entire vehicle.
Regenerative Lowering: Returns energy to the battery while lowering the load, extending run times by approximately 11%.
Wire Guidance Compatibility: Can be equipped with “Intelliguide” to automatically steer the truck while locked onto a wire in the warehouse floor.
Open View Mast: Twin tubular design for unobstructed visibility during high-elevation tasks.

Usage Context

This unit is specifically engineered for high-bay distribution centers and e-commerce fulfillment where maximizing storage density is the priority. It allows for “Man-Up” order picking and full pallet handling in aisles where a standard counterbalance or reach truck cannot fit.

Specifications Toyota Forklift 9700-CSR30T | 1.3 ton

Manufacturer : Toyota Very Narror Aisle (VNA)
Model : 9700-CSR30T
Operation Position : Syand Up
Load Capacity : 1361 kg
Lift Height : 10008 mm
Usage Intensity : Medium-High
Transport Distance : Medium
Suitable Areas : Warehouses
Operator Position : Standing
Travel Speed, no load : 8.7 km/h
Free Lift : 3226 mm
Power Type : Lead acid

Standard Equipment

Available Options
3-Wheel Suspension System.
3 Year/3,000 Hour Extended Warranty.
48-Volt Power Unit.

ACR System

AC-Traction and Lift System.
Auto Center Nest.

Auto Traverse and Rotate.

Automatic Speed Reduction When Carriage Not TravelReady.
Automatic Steer Center on Power-Up.
Battery Compartment Width 21 in. (9600-CSR30T).

Maximum Usable Dimensions

Battery Compartment Width 23.75 in. (9700-CSR30T).
(Maximum Usable Dimensions).
lass=”yoast-text-mark” />>Battery Gates, Adjustable Retainers.

Battery Rollers.

Battery State-of-Charge

(BSOC) with Lift Interrupt.
Configurable Performance Parameters.
Controls, Ergonomic Handle Design.
Deadman, Dual.

Ergonomic Seat.

Fall Protection System: Body Belt or Full Body.
Harness and Tether.
Fan Package.
Flip-up Sidegates and Control Arms.

Height Indicator

Hour Meters (HD, HL, TM, KH, HA, HT).
intellispeed™ Control System.
LED Compartment, and Work Lights.
Lift System, High Performance.

Mast, Clear-View

Mast, Twin Tubular Design.
Non-skid Operator’s Platform.
Operator’s Position (Sit/Stand/Lean).
OSHA and ANSI/ITSDF Compliance.
Parking Brake, Automatic Engaging.
Power-up and run time diagnostics real time.

status/fault codes

Raymond® Red Finish with Black Mast.
Regenerative Braking.
Regenerative Lowering.
Separate Lift, Travel, and Steer Motors.
Slack Chain Switches.

Steering, Power

Storage Tote.
UL Type “E” Construction.
Vehicle Navigation Assistant.
Weight Sensing.
Work Lights and Fan.

Alternate Personal Fall Protection System

Full Front Barriers and 3-Bar Side-gates.
Audible Alarms.
Barriers, Pallet Handling.
Cold Storage Conditioning.
Enclosure for Cold Storage Conditioning.

End of Aisle Slowdown

Extended Turrets.
Keyless On/Off.
Lift and Lower Limit Switches.

Lights

Operator’s Clipboard.
UL Type “EE” Construction.
Wire Guidancerue Potential.

 

The Mastery of True Potential

Mastery of any undertaking can only be achieved if there is true potential and unwavering dedication to excellence. To Toyota, the 8 Series is the proud culmination of 50 years in the pursuit of mastery in the development and manufacture of forklifts.

Outstanding Comfort and Visibility

The 8 Series provides the comfort and visibility for long hours of efficient operation.

Efficiency-Boosting Operability

The operator’s compartment is carefully designed to ensure maximum forklift control from minimum operator effort.

Top-Class Stability

Toyota’s System of Active Stability (SAS), Operator Presence Sensing (OPS) system and Travel and Load Handling Control provide innovative, high-tech stability to the 8 Series.

Environmental Friendliness

Low noise and exhaust emissions make the 8 Series environmentally friendly.

Built-in Reliability and Serviceability

Designed to be tough and easy to maintain.

True Potential Through Outstanding Comfort and Visibility

Comfort is a Toyota tradition. With the 8 Series, it starts from the time you enter.

Grab the large assist grip, place your foot on the wide, low step and slide into the operator’s seat that provides comfort, support and retention.

Once you have been seated and wrapped your hands around the small- diameter steering wheel you will intuitively feel that everything you need for operating the forklift is within natural reach.

You will also instantly realize that you have a clear view of the forks and load. This comfort sets the stage for reaching the true potential of the forklift from Toyota.

Easy Entry and Exit

A large assist grip, A deep, wide step and a spacious opening team up for easy entry onto the forklift.

Comfort and Support ORS* Seat

The ORS seat can be adjusted 150 mm forward and backward to provide comfort and support to almost all sizes of operators. *ORS: Operator Restraint System.

Outstanding Visibility

The overhead guard, before mast and instrument panel have been designed to provide excellent visibility of the fork tips at the most frequently used lift heights.

Wide Floor Space

The spacious floor area enables a more relaxed operating position that contributes to comfort.

True Potential Through Outstanding Operability

Toyota used the latest technology to reexamine forklift operation in its search for enhanced operability. Motion-capture technology monitored every aspect of operator movement looking for ways to make operation more efficient.

Based on these findings, well-thought-out design changes were combined to make the 8 Series ready to transform every action of the operator into smooth and efficient operation.

Operator-Friendly Steering Wheel

The small-diameter steering wheel teams up with the full hydraulic power steering system to provide excellent maneuverability. The steering column offers step-less adjustment to accommodate a wide range of operator preferences.

Bagian bagian componet forklift terdiri dari Mesin, Transmisi, roda depan, roda belakang, rem, hydraulic, steer, mast dll

Foot-Activated Parking Brake (Powershift models)

The operator simply depresses the parking brake pedal to set it without changing operating position. A conveniently located handle is used to release it.

Rear-Pillar Assist Grip / Swivel Seat

The seat swivels to the right to facilitate operation in reverse.
The seat also swivels to the left to make it easier to enter and exit the forklift.

An optionally available rear-pillar assist grip with a horn button enhances
comfort by offering easy horn operation while traveling in reverse

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.
>Pulau kalimantan : Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan