Toyota Forklift C3E160II | 1.6 ton

Description

Toyota Forklift C3E160II | 1.6 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift C3E160II | 1.6 ton

The Toyota C3E160II is a 1.6-ton 3-wheel electric counterbalance forklift, often marketed under the BT Cargo or Toyota 8FBE series depending on the region.
It is designed for high maneuverability in tight warehouse spaces.

Feature Specification

Model C3E160II / 8FBE16.
Load Capacity 1,600 kg (1.6 Ton).
Load Center 500 mm.
Power Type Electric (Battery).
Battery Voltage/Capacity 48V / 390Ah – 545Ah (Standard options).
Operator Position Rider Seated.
Tire Type Solid / Pneumatic Shaped Cushion (SE).
Wheels (Front/Rear) 2x / 1 (3-wheel configuration).

Performance & Dimensions

Travel Speed (Full Load): Approx. 16.0 km/h.
Lift Speed (Full Load): 0.43 m/s.
Lowering Speed (Full Load): 0.50 m/s.
Turning Radius (Outside): 1,550 mm (highly compact for narrow aisles).
Overall Width: 1,050 mm – 1,070 mm.
Length to Fork Face: Approx. 2,010 mm.
Standard Lift Height: 3,000 mm (can vary by mast type: V, FV, or FSV).
Overhead Guard Height: 1,980 mm – 2,100 mm

Key Technical Features

System of Active Stability (SAS): Standard Toyota safety technology that monitors forklift operations to reduce the risk of tip-overs.
Operator Presence Sensing (OPS): Automatically disables travel and hydraulic functions if the operator is not seated correctly.
AC Drive & Hydraulic System: Provides smooth control and regenerative braking to extend battery life.
Water Resistance: Typically rated at IPX4, allowing for limited outdoor use in light rain or damp conditions.

Common Mast Options

V (Standard): 2-stage wide view mast.
FV (Duplex): 2-stage mast with high free lift (suitable for containers).
FSV (Triplex): 3-stage mast for high reaching in warehouses with low door clearances.

Main Specification, Toyota Forklift C3E160II | 1.6 ton

Model : C3E160II
Load Capacity : 1600 kg
Load Center : 500 mm
Overall Width A : 1060 mm
Turning Radius (Outside) B : 1750 mm
Overhead Guard Height C : 2,025 [2,105] mm
Length to Fork Face : 2075 mm

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.

Pulau kalimantan :

Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan