Toyota Forklift 8FBR13 | 1.3 ton

Description

Toyota Forklift 8FBR13 | 1.3 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift 8FBR13 | 1.3 ton

Here are the complete unit specifications for the Toyota 8FBR13 electric stand-up reach truck:

General Specifications

• Manufacturer: Toyota Material Handling

• Model: 8FBR13 (8-Series Stand-Up Reach Truck)

• Rated Load Capacity: 1,250 kg to 1,300 kg

• Load Center: 500 mm

• Operator Position: Stand-Up

• Power Type: Electric / Battery (48V)

Dimensions

• Overall Length: 1,900 mm

• Length to Fork Face: 1,050 mm

• Overall Width: 1,090 mm

• Width Between Reach Legs: 755 mm

• Overhead Guard Height: 2,250 mm

• Mast Lowered Height (Standard): 1,995 mm

• Lift Height Range: 3,000 mm (standard) up to 6,000 mm (high-mast/FSV variants)

• Standard Fork Dimensions (T x W x L): 30 mm x 100 mm x 850 mm (optional sizes up to 1,070 mm available)

• Reach Stroke: 590 mm

Maneuverability & Performance

• Turning Radius (Outside): 1,490 mm

• Right-Angle Stacking Aisle Width (1100×1100 mm pallet): ~2,570 mm

• Travel Speed (Forward / Reverse):

  • Full Load: 9.5 km/h

  • No Load: 10.5 km/h

• Lifting Speed:

  • Full Load: 320 mm/sec

  • No Load: 560 mm/sec

• Lowering Speed:

  • Full Load: 500 mm/sec

  • No Load: 550 mm/sec

Battery & Electrical Motors

• System Voltage: 48V

• Standard Battery Capacity: 280 Ah / 5 hr rating (High capacity option up to 370 Ah)

• Drive Motor: 4.9 kW (AC Inverter Control)

• Load Handling Motor: 8.0 kW (AC Inverter Control)

• Power Steering Motor: 0.26 kW

Weight & Chassis

• Total Weight (Without Battery): Approx. 1,675 kg

• Standard Battery Weight: Approx. 355 kg – 400 kg

• Brake System: Mechanical Foot / Service Brake + Electrical Regenerative Braking System

Key Features

• SAS-R System: System of Active Stability for Reach Trucks to enhance lateral and longitudinal stability.

• Energy Regeneration: Features switchback and pedal-release regenerative braking to extend battery run-time.

• Multifunctional Display: Digital screen displaying battery capacity, speed, and diagnostic data.

Meskipun sering dikategorikan secara umum dalam kelas “1.3 Ton”, berdasarkan lembar spesifikasi resmi (spec sheet) pabrikan Toyota, kapasitas beban maksimal murninya adalah 1.250 kg.

Berikut adalah spesifikasi teknis detail untuk unit Toyota 8FBR13:

Berikut adalah spesifikasi teknis lengkap untuk unit Toyota Stand-up Reach Truck 8FBR13 (kapasitas 1,3 ton):

Spesifikasi Umum

• Manufaktur / Seri: Toyota Material Handling (8-Series Reach Truck)

• Model Unit: 8FBR13

• Kapasitas Angkat Maksimal: 1.300 kg (1,3 Ton)

• Pusat Beban (Load Center): 500 mm

• Tipe Operasional: Stand-up / Reach Truck (Operator Berdiri)

• Tipe Daya: Elektrik / Baterai (48 Volt)

Dimensi Utama

• Panjang Total (tanpa garpu): 1.050 mm

• Panjang Total (dengan garpu standar): ~1.900 mm

• Lebar Total: 1.090 mm

• Tinggi Overhead Guard (Atap Operator): 2.250 mm

• Tinggi Tiang Rendah / Mast Mampat (Standar): 1.995 mm

• Tinggi Angkat (Standard Lift Height): 3.000 mm (Opsi tiang duplex/triplex hingga 6.000 mm)

• Dimensi Garpu (T x L x P): 30 mm x 100 mm x 850 mm (opsi garpu hingga 1.070 mm)

• Jangkauan Maju-Mundur (Reach Stroke): 590 mm

Performa & Manufaktur

• Radius Putar Luar (Turning Radius): 1.490 mm

• Lebar Gang Kerja (Aisle Width) untuk Palet 1100 x 1100 mm: ~2.570 mm

• Kecepatan Jalan (Maju/Mundur):

  • Beban Penuh: 9,5 km/jam

  • Tanpa Beban: 10,5 km/jam

• Kecepatan Angkat (Lifting Speed):

  • Beban Penuh: 320 mm/detik

  • Tanpa Beban: 560 mm/detik

• Kecepatan Turun (Lowering Speed):

  • Beban Penuh: 500 mm/detik

  • Tanpa Beban: 550 mm/detik

Spesifikasi Baterai & Motor

• Tegangan Sistem (Voltage): 48V

• Kapasitas Baterai Standar: 280 Ah / 5 hr (Tersedia opsi kapasitas hingga 370 Ah)

• Motor Penggerak (Drive Motor): 4,9 kW (Kontrol AC Inverter)

• Motor Angkat (Hydraulic Motor): 8,0 kW (Kontrol AC Inverter)

• Motor Kemudi (Power Steering Motor): 0,26 kW

Bobot & Rem

• Berat Kosong (Tanpa Baterai): Sekitar 1.675 kg

• Berat Baterai: Sekitar 355 kg – 400 kg

• Sistem Rem: Rem Kaki Mekanis + Electrical Regenerative Braking System

Fitur Unggulan

• SAS-R (System of Active Stability for Reach Trucks): Menjaga stabilitas lateral dan vertikal saat unit mengangkat beban tinggi.

• Energy Regeneration: Memanfaatkan pengereman regeneratif untuk menghemat konsumsi daya baterai dan memperpanjang durasi operasional.

• Display Multifungsi Digital: Menampilkan indikator baterai, indikator kecepatan, mode berkendara, dan kode diagnostik.

The Mastery of True Potential

Mastery of any undertaking can only be achieved if there is true potential and unwavering dedication to excellence. To Toyota, the 8 Series is the proud culmination of 50 years in the pursuit of mastery in the development and manufacture of forklifts.

Outstanding Comfort and Visibility

The 8 Series provides the comfort and visibility for long hours of efficient operation.

Efficiency-Boosting Operability

The operator’s compartment is carefully designed to ensure maximum forklift control from minimum operator effort.

Top-Class Stability

Toyota’s System of Active Stability (SAS), Operator Presence Sensing (OPS) system and Travel and Load Handling Control provide innovative, high-tech stability to the 8 Series.

Environmental Friendliness

Low noise and exhaust emissions make the 8 Series environmentally friendly.

Built-in Reliability and Serviceability

Designed to be tough and easy to maintain.

True Potential Through Outstanding Comfort and Visibility

Comfort is a Toyota tradition. With the 8 Series, it starts from the time you enter. Grab the large assist grip, place your foot on the wide, low step and slide into the operator’s seat that provides comfort, support and retention.

Once you have been seated and wrapped your hands around the small- diameter steering wheel you will intuitively feel that everything you need for operating the forklift is within natural reach.

You will also instantly realize that you have a clear view of the forks and load.

This comfort sets the stage for reaching the true potential of the forklift from Toyota.

Easy Entry and Exit

A large assist grip, A deep, wide step and a spacious opening team up for easy entry onto the forklift.

Comfort and Support ORS* Seat

The ORS seat can be adjusted 150 mm forward and backward to provide comfort and support to almost all sizes of operators. *ORS: Operator Restraint System.

Outstanding Visibility

The overhead guard, mast and instrument panel have been designed to provide excellent visibility of the fork tips at the most frequently used lift heights.

Wide Floor Space

The spacious floor area enables a more relaxed operating position that contributes to comfort.

True Potential Through Outstanding Operability

Toyota used the latest technology to reexamine forklift operation in its search for enhanced operability. Motion-capture technology monitored every aspect of operator movement looking for ways to make operation more efficient.

Based on these findings, well-thought-out design changes were combined to make the 8 Series ready to transform every action of the operator into smooth and efficient operation.

Operator-Friendly Steering Wheel

The small-diameter steering wheel teams up with the full hydraulic power steering system to provide excellent maneuverability. The steering column offers step-less adjustment to accommodate a wide range of operator preferences.

Bagian bagian componet forklift terdiri dari Mesin, Transmisi, roda depan, roda belakang, rem, hydraulic, steer, mast dll

Foot-Activated Parking Brake (Powershift models)

The operator simply depresses the parking brake pedal to set it without changing operating position. A conveniently located handle is used to release it.

Rear-Pillar Assist Grip / Swivel Seat

The seat swivels to the right to facilitate operation in reverse. Firstly,The seat also swivels to the left to make it easier to enter and exit the forklift.

An optionally available rear-pillar assist grip with a horn button enhances comfort by offering easy horn operation while traveling in reverse

Support kawasan industri diseluruh indonesia antara lain

Jawa

• jababeka – cikarang ,
• lippo – cikarang,
• Kawasan Industri MM 2100 – cibitung,
• KIIC – Karawang,
• suryacipta – karawang,
• kota bukit indah – purwakarta,
• subang smartpolitan – subang,
• kawasan industri terpadu wilmar – serang,
• kawasan industri krakatau – cilegon,
• modern cikande industrial – cikande,
• industri terpadu batang ( KITB ).
• kawasan industri kendal,
• industri wijaya kusuma – semarang,
• java integrated and ports estate – gersik,
• kawasan industri pier – pasuruan,
• SIER ( surabaya industrial estate rungkut – surabaya,
• Ngoro industrial park ( NIP) – mojokerto.

Sumumatera

• KEK Sei Mangkei – sumatera utara,
• KEK Arun Lhokseumawe – aceh,
• KEK Galang Batang – Riau,
• KI Kuala Tanjung – sumatera utara,
• KI Tanjung Enim – sumatera selatan,
• Batamindo Industrial Park – Batam,
• Kabil Integrated Industrial Park – batam,
• Panbil Industrial Estate – batam,
• Bintan Inti Industrial Estate – batam,
• KI Wiraraja – batam,
• Kawasan Industri Medan (KIM) – sumatera utara,
• Padang Industrial Park – sumatera barat,
• KI Ladong – aceh,
• Kawasan Industri Lampung (KAIL) – bandar lampung,
• Kawasan Terintegrasi Merak-Bakauheni,
• KI Tenayan – pekanbaru,
• KI Dumai & KI Tanjung Buton – riau.

Kalimantan

• Kawasan Industri Kariangau (KIK) – balikpapan,
• Kawasan Industri Buluminung – Penajam Paser Utara,
• Industri Bontang – kaltim,
• Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
• Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
• Kawasan Industri Ketapang,
• Industri Mandor – kab landak,
• Industri Jorong – tanah laut,
• Kawasan Industri Batulicin – tanah bumbu,

Sulawesi

• Kawasan Industri Morowali (IMIP) sulteng,
• Kawasan Industri Indonesia Huabao (IHIP) – morowali,
• Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
• Industri Palu (KEK Palu),
• Kawasan Industri Konawe (VDNIP) – morosi,
• Kawasan Industri Pomalaa,
• Industri Motui – konawe utara,
• Industri Kendari,
• IKIP (Indonesia Konawe Industrial Park),
• Kawasan Industri Makassar (KIMA) – sulsel,
• Kawasan Industri Bantaeng (KIBA),
• Industri Takalar,
• Maros Industrial Park,
• Kawasan Industri Mongondow (KIMONG),
• Kawasan Ekonomi Khusus (KEK) Bitung.

Papua

• Kawasan Industri Tangguh – teluk bintuni,
• Kawasan Industri Fakfak – papua barat,
• Industri Timika – papua tengah,
• Kawasan Industri Merauke,
• dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan