Toyota Order Picker 8FBP9 | 0.9 ton

Description

Toyota Order Picker 8FBP9 | 0.9 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Order Picker 8FBP9 | 0.9 ton

Main Specification, Toyota Order Picker 8FBP9 | 0.9 ton

The Toyota 8FBP9 is a specialized, compact electric order picker designed for narrow-aisle efficiency and high-level picking.
Since it belongs to the 8-Series, it features Toyota’s signature System of Active Stability (SAS) and AC power system for smooth, responsive handling.
Here are the key specifications for the 0.9-ton (900 kg) model:

Core Performance Specifications

Model 8FBP9.
Load Capacity 900 kg (0.9 Ton).
Load Center 600 mm.
Power Source Electric (Battery)
Voltage 48V.
Travel Speed (Full Load) ~9.0 – 10.5 km/h.
Lift Speed (Full Load) ~0.20 – 0.25 m/s.

Dimensions & Maneuverability

The 8FBP9 is built for agility in tight warehouse spaces. While exact dimensions can vary slightly based on the mast configuration (V, FV, or FSV), the standard profile is as follows:
Overall Width: ~1000 mm (Standard narrow chassis).
Turning Radius: Highly compact, designed for “right-angle stacking” in aisles as narrow as 1.4 to 1.6 meters (depending on pallet size).
Fork Dimensions: Typically 1070 mm or 1150 mm length to handle standard Euro or ISO pallets.

Key Features & Technology

AC Drive System: Provides powerful acceleration, smoother direction changes, and better energy efficiency compared to older DC motors.
Regenerative Braking: Recharges the battery during deceleration, extending shift life.
Ergonomic Operator Cabin: Features a low step height to reduce fatigue for operators who frequently hop on and off.
Small Diameter Steering Wheel: Provides effortless control and reduces shoulder strain.
Digital Multifunction Display: Shows battery discharge status, hour meter, and error codes for easy maintenance.

Mast Options

The “900kg” rating is the nominal capacity. Depending on your warehouse height, you can equip the 8FBP9 with different masts:
2-Stage Mast (V): Basic lift heights.
3-Stage Mast (FSV): For higher reach (often up to 5-6 meters) while maintaining a low collapsed height.
Note: As lift height increases, the residual capacity may drop below 900 kg. Always check the specific load chart attached to the unit for safety.
Would you like me to help you compare these specs against a larger model, like the 1.0 or 1.5-ton versions?