TCM Forklift RTF200 | 2 ton

Description

TCM Forklift RTF200 | 2 ton

The TCM RTF200 is the 2.0-ton variant of TCM’s multi-directional reach truck series.
It is specifically engineered for facilities that handle a mix of standard

pallets and extra-long or bulky loads (like timber, aluminum profiles, or piping) in narrow aisles.Below are the technical specifications for the RTF200:

Core Performance & Capacity

Feature : Specification
Model : RTF 200.

Load Capacity : 2,000 kg (2.0 ton)
Load Center : 600 mm.

Max Lift Height : Up to 9,700 mm (9.7m)
Travel Speed (Full/No Load) : 13.0 / 13.0 km/h.

Lift Speed (Full/No Load) : 0.33 / 0.55 m/s

Physical Dimensions & Maneuverability

Total Width: 1,744 mm (The wider chassis provides the lateral stability needed for sideways travel).3.

Length to Face of Forks: 1,323 mm
Turning Radius: 1,772 mm4.

Aisle Width (Pallet 1000×1200): Approx. 2,787 mm (crosswise)

4-Way Capability: Allows the truck to change direction by 90° without turning the chassis, enabling it to transport long loads through narrow doorways and aisles as slim as 2.3 meters.5

Electrical System & Powertrain

Voltage: 48V6
Battery Capacity: 450 Ah to 900 Ah (depending on shift requirements).
Drive Motor: 7.2 kW AC motor (High-performance, low-maintenance).7
Lift Motor: 15.0 kW8

Key Specialized Features

Synchronized Steering: All wheels can be synchronized via a single button press to switch between standard and multi-directional modes instantly.

lass “yoast-text-mark” Ergo Logic Joystick: A multi-function control that allows the operator to handle lifting, tilting, reaching, and side-shifting with a single hand.

Tilting Seat (18°): To prevent neck strain, the seat reclines automatically when the operator looks up to stack loads at heights above 5 meters.

ProVision Mast: Features a low-profile dash and an angled overhead guard for an unobstructed view of the forks, which is critical when navigating wide loads.

Hydraulic Fork Spread: Usually comes standard with a wide fork spreader to provide better support for long materials.

>Note: Because the RTF200 is a specialized 4-way truck, its chassis is significantly wider (1,744 mm) than a standard reach truck like the RTM200 (approx. 1,270 mm). Ensure your rack openings are wide enough to accommodate this footprint.

Would you like me to find a brochure for the RTF series, or perhaps compare this to the TCM RTM200 if you only handle standard pallets?