Heli Pallet Stacker CQDH14 | 1.4 ton

Description

Heli Pallet Stacker CQDH14 | 1.4 ton

The Heli CQDH14-850 is a 1.4-ton electric “walkie” reach stacker, widely used for its scissor-reach (pantograph) design.
This allows it to handle both open and closed pallets (CHEP) and operate in narrower aisles than a standard counterbalance forklift.
Below are the detailed technical specifications for the 1.4-ton model.

Performance & Capacity

Rated Load Capacity: 1,400 kg (1.4 Ton).
Load Center: 500 mm.
Standard Lifting Height: Options range from 3,500 mm to 5,500 mm (common standard is 4,500 mm).
Reach Distance: 0 – 550 mm (Scissor/Pantograph reach).
Travel Speed (Laden/Unladen): 3.5 / 4.0 km/h.
Gradeability (Laden/Unladen): 3% / 5%.

Dimensions & Weight

Overall Length: 2,225 mm.
Overall Width: 1,430 mm.
Fork Dimensions: 1,070 x 100 x 40 mm (L x W x T).
Turning Radius: 1,566 mm.
Minimum Aisle Width (1000×1200 pallet): ~2,315 mm.
Service Weight (with battery): Approx. 2,300 kg – 2,400 kg.

Electrical System

Battery Voltage/Capacity: 24V / 345Ah (Lead-acid is standard; Lithium-ion is often an available option).
Drive Motor: 1.5 kW (AC System – maintenance-free).
Lifting Motor: 3.0 kW (DC) or 4.5 kW in newer configurations.
Controller: ZAPI or Curtis AC Controller (depending on the specific regional build).

Key Features

Scissor Reach: Unlike standard stackers, the forks extend forward, allowing it to pick up pallets from racks where the base legs cannot enter.
Electronic Power Steering (EPS): Provides light and low-noise steering, which is essential for maneuvering in tight warehouse spaces.
“Moon Walk” Function: Allows the handle to be at any angle while the vehicle maintains a straight path, improving safety in cramped aisles.
Automatic Deceleration: The unit automatically slows down when turning to prevent tipping.
Mast Type: Usually equipped with a Standard 3-stage (Triplex) Full Free Lift mast to allow high lifting while maintaining a low collapsed height.
Note: Performance may vary slightly depending on the mast height selected (e.g., a 5.5m mast will have a lower residual capacity at full height compared to a 3.5m mast).
Would you like me to find a price estimate or compare this model’s turning radius with a standard counterbalance forklift?