Hangcha Forklift HRT16 | 1.6 ton

Description

Hangcha Forklift HRT16 | 1.6 ton

BELIALAT.COM support penjualan unit, parts, service, rental, maintenance contract, overhaul, reconditioned Hangcha Forklift HRT16 | 1.6 ton

Hangcha Forklift HRT16 | 1.6 ton, Specifications

The Hangcha HRT16 is a 1.6-ton electric reach truck, typically part of Hangcha’s specialized warehouse equipment line (often falling under the A or XC Series designations depending on the specific power unit—Lead-Acid or Lithium-Ion).
Below are the primary technical specifications for the 1.6-ton (1,600 kg) model:

Performance & Capacity

Rated Capacity: 1,600 kg (1.6 tons).
Load Center: 600 mm.
Max Lift Height: Standard masts usually reach 3,000 mm, but high-reach Triplex options can extend up to 12,500 mm.
Travel Speed (Full Load): Approx. 10.2 km/h.
Lifting Speed (Full Load): Approx. 220–260 mm/s.
Gradeability (Full Load): 10%.

Dimensions & Maneuverability

Turning Radius: Approx. 1,675 mm (compact design for narrow aisles).
Overall Width: 1,240 mm – 1,270 mm (depending on configuration).
Overall Length (to fork face): Approx. 1,802 mm.
Aisle Width (Pallet 1000×1200 cross): Requires approximately 2,825 mm.
Reach Distance: Approx. 500 mm – 600 mm.

Electrical & Drive System

Drive Motor: AC technology (typically 5.4 kW) for high efficiency and lower maintenance.
Lift Motor: Powerful AC lift motor (typically 7.5 kW – 11 kW).

Battery Options:

Lead-Acid: 48V / 400Ah – 500Ah.
Lithium-Ion (Li-Ion): 48V or 80V systems (e.g., 202Ah or 300Ah configurations) offering fast charging and zero maintenance.
Controller: Curtis or Inmotion AC Controllers with regenerative braking.

Key Features

Ergonomics: Adjustable steering column, suspension seat, and multi-function joystick (on premium models).
Visibility: Wide-view mast design and a clear-view overhead guard to improve safety during high-level stacking.
Safety: Automatic speed reduction during cornering and “Soft Landing” system to prevent forks from slamming onto the ground.
Would you like me to find a digital brochure for this specific model or compare its performance against the 2.0-ton variant?

Characteristics

Model : Electric Reach Truck
Operator Position : Sit on Type
Load Capacity : 1600 Kg
Load Center C : 500 mm
Alternative Capacity Q2 : 1350 mm
Load Distance X : 404 mm
Wheelbase Y : 1400 mm

Weight

Service Weight : 2550 mm
Axle Loading/Loaded/Front : 3530 kg
Loading/Loaded/Rear : 520 kg

Axle Loading/Unloaded/Front : 1035 kg
Axle Loading/Unloaded/Rear : 1515 kg

Dimensions

Tilting Angle α/β Forward/Backward degree : 6/10
accordingly Mast Height, Lowered h1 2-stage Mast : 1995 mm
Std Free Lift h2 2-stage std. Mast,From Ground : 140 mm
Std. Lift Height h3 2-stage Std. Mast,
From Ground : 3000 mm

MastHeight, Extended h4 2-stage. Mast : 3955 mm
above all Heigt, Overhead Guard h6 : 2070 mm
Length, with std. forks L1 : 3160 mm

Length, to forks Face L2 : 2240 mm
Width, at Tyre b1 Single : 1070 mm
Forks s/e/l Thicness x Width x Length : 35 x 100 x 920 mm

additionally Fork Carriage Class ISO 2328, Type A/B/no : Class 2,A mm
Width, Fork Carriage b2 : 970 mm
Ground Clereance m1 Under Mast : 120 mm

Ground Clereance m2 at Center of Wheelbase : 130 mm
Right Angle Stacking Aisle Ast with L1000x W800 Pallet : 3560 mm
Turning Radius Wa : 1955 mm

Performance

Travel Speed (FWD) Loaded 1st/2nd : 18.5 km/h
Travel Speed (FWD) Unloaded 1st/2nd : 19.0 km/h
Lifting Speed Loaded : 620 mm/s } | { Lifting Speed Unloaded : 670 mm/s

after all Lowering Speed Loaded : 500 mm/s
Lowering Speed Unloaded : 550 mm/s
Max. Drawbar Pull Loaded : 13 KN

Max. Gradeability Loaded % : 33 %
afterward Service Brake Operation/Control : Foot/Hydraulic
Parking Brake Operation/Control : Hand/Mechanical

Steering Type : FHPS
Battery Voltage/ Capacity at 5-hour rating V/ah : 12/64 Volt/ah

Tyre

size, front ( standard tread ) : 6.9-9-10PR
size, rear : 5.0-8-8PR

Dual tyre

Tread front ( dual tread ) : 1000 mm
Overall width : 1190 mm
Service weight ( dual tread ) :2690 kg