Sumitomo Excavator SH180LC-6 | 17.2 ton

Description

Sumitomo Excavator SH180LC-6 | 17.2 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Sumitomo Excavator SH180LC-6 | 17.2 ton

The full unit specifications for the Sumitomo SH180LC-6 Hydraulic Excavator cover its mechanical design, engine, hydraulic systems, and performance indicators.

Engine Specifications

• Make & Model: Isuzu AI-4JJ1X

• Type: 4-cylinder, common-rail fuel injection, turbocharger, cooled EGR (Tier III / Interim Tier 4 equivalent depending on region)

• Rated Output: 92 kW (125 PS) @ 2,200 rpm

• Displacement: 2.99 liters (2,990 cc)

• Max Torque: 420 Nm @ 1,800 rpm

• Bore & Stroke: 95.4 mm x 104.9 mm

Hydraulic System

• Main System: SIH:S+ Hydraulic system featuring Spool Stroke Control (SSC) to balance engine load and flow requirements.

• Main Pumps: 2 variable displacement axial piston pumps with regulating systems.

• Maximum Pressure: 34.3 MPa (Automatically boosts to 36.3 MPa via Auto Power Boost).

• Travel Motor: Variable displacement axial piston motor.

• Swing Motor: Fixed displacement axial piston motor.

Performance Metrics

• Operating Weight: 17,200 kg to 17,900 kg (Standard configuration typically sits at 17,600 kg)

• Bucket Capacity: 0.55 m³ to 0.80 m³ (Standard ISO heaped capacity: 0.62 m³)

• Bucket Digging Force: 112 kN (Increases to 118 kN with Power Boost)

• Arm Digging Force: 79 kN (Increases to 84 kN with Power Boost)

• Travel Speed: Dual-speed at 5.4 km/h (High) / 2.8 km/h (Low)

• Swing Speed: 11.5 rpm

• Drawbar Pull: 160 kN

• Gradeability: 70% (35 degrees)

• Ground Pressure: 41 kPa

Working Ranges & Dimensions

(Based on standard 5.15 m Boom and 2.62 m Arm configuration)

• Maximum Digging Depth: 6,060 mm

• Maximum Horizontal Reach: 9,040 mm

• Transport Length: 8,440 mm

• Transport Width: 2,590 mm

• Transport Height: 2,950 mm

• Track Shoe Width: 500 mm (standard)

• Bucket Width: 1,020 mm

Refill Capacities

• Fuel Tank: 300 liters

• Hydraulic Fluid Tank: 90 liters (System capacity is larger)

Key Features & Technologies

• Advanced Working Modes: Equipped with three throttle-selectable modes: SP (Super Power), H (Heavy), and A (Auto).

• Energy Saving Systems: Includes Idle Shut Down (auto engine kill when inactive) and Auto Idle (drops to idle after 5 seconds of neutral controls).

• Durability Design: Utilizes the Easy Maintenance System (EMS) lubrication bushes, extending bucket pin lubrication intervals up to 250 hours and other structural sections up to 1,000 hours.

• Cabin Upgrades: Pressurized, ROPS-certified safety cabin paired with a 7-inch high-definition full-color LCD monitor and standard rear-view camera.

Engine

Model : ISUZU GH-4HK1X
Type : Water-cooled, 4-cycle diesel, 4-cylinder in line, high
pressure common rail system (electric control),
Turbocharger with air-cooled intercooler.
Rated output : 132.1 kW (179.6 PS) at 2,000 min-1(rpm)
Maximum torque : 622 N-m at 1,800 min-1(rpm
Piston displacement : 5.193 ltr
Bore and stroke : 115 mm x 125 mm
Starting system : 24 V electric motor starting
Alternator : 24 V, 50 A
Fuel tank : 410 ltr
Air filter : Double element

Hydraulic Pumps

Two variable displacement axial piston pumps provide power for
boom/arm/bucket, swing, and travel. One gear pump for pilot controls.
Maximum oil flow : 2 x 234 ltr/min
Pilot pump max. oil flow : 20 ltr/min

Hydraulic Motor

For travel: Two variable displacement axial piston motors
For swing: One fixed displacement axial piston motor

Working circuit pressure

Boom/arm/bucket : 34.3 MPa (350 kgf/cm2 )
Boom/arm/bucket : 36.8 MPa (375 kgf/cm2 ) with auto power-up
Swing circuit ” 28.9 MPa (295 kgf/cm2 )
Travel circuit : 34.3 MPa (350 kgf/cm2

Control valve

With boom/arm holding valve
One 4-spool valve for right track travel, bucket, boom and arm acceleration
One 5-spool valve for left track travel, auxiliary, swing, boom acceleration and arm

Oil filtration

Return filter : 6 microns
Pilot filter : 8 microns
Suction filter : 105 microns