Genset Perkins 55 kVA

Description

Genset Perkins 55 kVA
BELIALAT.COM support penjualan unit, parts, service, rental, maintenance contract, overhaul, reconditioned Genset Perkins 55 kVA

Specifications

Power Output:
– Standby Power Rating: 55 kVA / 44 kW
– Prime Power Rating: 50 kVA / 40 kW
Engine:
– Model: Perkins 1103A-33TG1 or similar
– Governor: Electronic
– Speed: 1500 rpm
Alternator:
– Manufacturer: Leroy Somer or Stamford
Voltage and Frequency:
– Voltage: 400V
– Frequency: 50Hz
Control Panel:
– Model: Deep Sea DSE7320 or similar
Fuel Consumption:
– Approximately 4-7 liters per hour at 100% load (may vary depending on configuration)
Dimensions and Weight:
– Dimensions: approximately 450 x 250 x 350 mm (may vary depending on configuration)
– Weight: approximately 70-150 kg (may vary depending on configuration)
Fuel Tank Capacity:
– Varies depending on configuration (approximately 5-10 liters)
Noise Level:
– Varies depending on configuration (approximately 6-10 dB(A) at 7m)
Warranty:
– Varies depending on manufacturer and dealer (typically 1-2 years or 1000-2000 hours)

These specifications may vary depending on the configuration and application of the genset. It’s always best to consult the manufacturer or authorized dealer for the most accurate and up-to-date information.

Total Power

Gross Mechanical Output : 50-55 kW
Typical Electrical Output : 54-60 kVA (43-47kWe)
Rated Speed : 1500/1800 rpm

Emission Standards

Emissions : UN ECE R96 Stage IIIA constant speed and U.S. EPA Stationary Emergency Engine

50 Hz Typical Electrical Output

Prime : 40 kVA
Standby : 44 kVA

General

Number of Cylinders : 4 inline
Bore : 84 mm
Stroke : 100 mm
Displacement 2.2 Liters
Compression Ratio : 23.3:1
Aspiration : Turbocharged aftercooled
Combustion System : Indirect injection
Rotation from Flywheel End : Anti-clockwise
Cooling System : Liquid
Aftertreatment –
Typical Alternator Effeciency : 90%
Switchable : NO.

Electropak Dimensions

Dry Weight : 327 kg
Height : 985 mm
Length : 992 mm
Width : 602 mm

Disclaimer

Note 1 *Final dimensions dependent on selected options

Definitions
Prime Power : Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power : Power available at variable load in the event of a main power network failure. No overload is permitted.