Toyota Forklift C3E180LII | 1.8 ton

Description

Toyota Forklift C3E180LII | 1.8 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift C3E180LII | 1.8 ton

The Toyota C3E180LII is a 1.8-ton electric 3-wheel counterbalanced forklift designed for high maneuverability in tight warehouse spaces.
It is part of a series (often associated with the 7FB or 8FBE lineages depending on the regional market configuration) that emphasizes energy efficiency and a compact footprint.
Below are the technical specifications for this 1.8-ton unit:

Capacity & Performance

Load Capacity: 1,800 kg (1.8 tons).
Load Center: 500 mm.
Travel Speed (Full Load): Approx. 12.0 – 12.5 km/h.
Lift Speed (Full Load): Approx. 0.31 m/s.
Lowering Speed (Full Load): Approx. 0.59 m/s.
Gradeability (Full Load): 6% – 7% (Max gradeability up to 16%).

Dimensions & Weight

Service Weight (Including Battery): Approx. 2,900 – 3,200 kg (varies by battery choice).
Turning Radius (Wa): 1,550 mm.
Overall Width: 1,075 mm.
Length to Fork Face: 1,905 mm.
Overhead Guard Height: 1,980 mm.
Standard Lift Height: 3,000 mm (options typically available up to 6,000 mm).
Tilt Angle (Forward/Backward): 5 / 6 degrees.

Electrical System

Voltage: 48V.
Standard Battery Capacity: 390 Ah (High-capacity options up to 565 Ah are common).
Drive Motor Rating: 4.9 x 2 kW (Dual AC drive motors).
Lift Motor Rating: 9.2 kW.
Controller Type: AC Inverter (MOSFET).

Key Features

System of Active Stability (SAS): Toyota’s proprietary technology that monitors forklift operations to reduce the risk of tip-overs.
Operator Presence Sensing (OPS): A safety system that disables drive and hydraulic functions if the operator is not properly seated.
Maneuverability: The 3-wheel configuration allows the rear steer wheel to turn more than 90 degrees, enabling the unit to pivot within its own width.
IPX4 Rating: Provides protection against water splashes, making it more durable in varying warehouse environments.
Ergonomics: Features a small-diameter steering wheel and a spacious floor area to reduce operator fatigue during long shifts.

Main Specification, Toyota Forklift C3E180LII | 1.8 ton

Model : C3E180LII
Load Capacity : 1800 kg
Load Center : 500 mm
Overall Width A : 1060 mm
Turning Radius (Outside) B : 1750 mm
Overhead Guard Height C : 2,025 [2,105] mm
Length to Fork Face : 2075 mm

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.

Pulau kalimantan :

Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan