Toyota Forklift C6E250VLII | 2.5 ton

Description

Toyota Forklift C6E250VLII | 2.5 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift C6E250VLII | 2.5 ton

The Toyota C6E250VLII is a high-performance, 4-wheel electric counterbalance forklift within the BT Cargo/8-Series family.
This specific “VL” variant typically denotes a “Very Long” chassis or high-capacity battery configuration, designed for high-intensity operations.
Below are the technical specifications for this unit:

General Performance

Load Capacity: 2,500 kg (2.5 ton).
Load Center: 500 mm.
Drive Type: Electric (80V AC System).
Travel Speed (Full Load/No Load): 16 / 16 km/h. (Standard) or up to 19 / 20 km/h (Performance mode).
Lift Speed (Full Load/No Load): 0.38 / 0.60 m/s.
Gradeability (Full Load): 13% – 19% (Depending on configuration).

Dimensions & Weight

Service Weight (incl. battery): ~5,087 kg.
Length to Fork Face: 2,440 mm.
Overall Width: 1,195 mm.
Wheelbase: 1,735 mm.
Turning Radius: 2,175 mm.
Overhead Guard Height: 2,215 mm.
Ground Clearance (Center of Wheelbase): 132 mm.

Mast & Forks

Standard Lift Height: 3,300 mm (can vary based on mast type: V, FV, FSV).
Height, Mast Lowered: 2,235 mm (Standard).
Tilt (Forward/Backward): 4.25° / 8°.
Fork Dimensions: 40 x 100 x 1,000 mm.

Battery & Motor

Battery Voltage: 80 V.
>Battery Capacity (K5): 700 Ah.
>Battery Weight: ~1,863 kg.
Drive Motor Rating: 16.1 kW (Standard) / 21.4 kW (Performance).
Lift Motor Rating: 17.3 kW.

Key Features

Toyota SAS (System of Active Stability): Electronically monitors and controls forklift stability to reduce the risk of tip-overs.
Operator Presence Sensing (OPS): Automatically disables travel and hydraulic functions if the operator is not seated correctly.
Pneumatic Shaped Cushion Tires: Provides a balance of durability for indoor surfaces and stability for light outdoor use.
AC Drive System: Offers smooth acceleration and regenerative braking to extend battery life.

Main Specification, Toyota Forklift C6E250VLII | 2.5 ton

Model : C6E250VLII
Load Capacity : 2500 kg
Load Center : 500 mm
Overall Width A : 1060 mm
Turning Radius (Outside) B : 1750 mm
Overhead Guard Height C : 2,025 [2,105] mm
Length to Fork Face : 2075 mm

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai & KI Tanjung Buton – riau.

Pulau kalimantan :

Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan Ekonomi Khusus (KEK) Bitung.

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan