Toyota Forklift C3E150II | 1.5 ton

Description

Toyota Forklift C3E150II | 1.5 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift C3E150II | 1.5 ton

The Toyota C3E150II is a 1.5-ton capacity electric forklift designed for high efficiency in narrow-aisle warehouse environments.
This model is part of Toyota’s 3-wheel electric lineup, known for its tight turning radius and AC power system.

Feature Specification

Model C3E150II.
Load Capacity 1,500 kg (1.5 Tons).
Load Center 500 mm.
Power Source Electric (Battery).
Operator Type Sit-down.
Tire Type Solid / Non-marking.
Number of Wheels 3 (Rear-wheel steer).

Performance & Dimensions

Mast Options: Standard heights typically range from 3,000 mm to 6,000 mm, depending on whether it is a 2-stage or 3-stage (FSW) mast.
>Turning Radius: Its 3-wheel configuration allows for a 360° turn almost on its own axis, making it ideal for racking aisles as narrow as 3.2 to 3.5 meters.
Travel Speed: Approximately 12–15 km/h (varies by load and battery state).
Lifting Speed: Typically averages 0.3–0.5 m/s under full load.

Key Features

AC Drive System: Uses an AC motor which reduces maintenance costs (no brushes to replace) and provides smoother acceleration and regenerative braking.
>System of Active Stability (SAS): Features Toyota’s proprietary electronic control system that monitors forklift operations to help reduce the risk of tip-overs during turns and high-lifting.
>Ergonomics: Designed with a low entry step, adjustable seating, and a small-diameter steering wheel to reduce operator fatigue during long shifts.
lass=”yoast-text-mark” />>Digital Display: Provides real-time data on battery discharge, hour meter, and error codes for quick troubleshooting.
>Note: Exact dimensions (such as overall length and width) can vary slightly based on the fork length and battery size installed.

Main Specification, Toyota Forklift C3E150II | 1.5 ton

Model : C3E150II
Load Capacity : 1500 kg
Load Center : 500 mm
Overall Width A : 1060 mm
Turning Radius (Outside) B : 1750 mm
Overhead Guard Height C : 2,025 [2,105] mm
Length to Fork Face : 2075 mm

Support kawasan industri di indonesia antara lain:

Pulau jawa

jababeka – cikarang ,
lippo – cikarang,
Kawasan Industri MM 2100 – cibitung,
KIIC – Karawang,
suryacipta – karawang,
kota bukit indah – purwakarta,
subang smartpolitan – subang,
kawasan industri terpadu wilmar – serang,
kawasan industri krakatau – cilegon,
modern cikande industrial – cikande,
industri terpadu batang ( KITB ).
kawasan industri kendal,
industri wijaya kusuma – semarang,
java integrated and ports estate – gersik,
kawasan industri pier – pasuruan,
SIER ( surabaya industrial estate rungkut – surabaya,
Ngoro industrial park ( NIP) – mojokerto.</p>

Pulau sumatera

KEK Sei Mangkei – sumatera utara,
KEK Arun Lhokseumawe – aceh,
KEK Galang Batang – Riau,
KI Kuala Tanjung – sumatera utara,
KI Tanjung Enim – sumatera selatan,
Batamindo Industrial Park – Batam,
Kabil Integrated Industrial Park – batam,
Panbil Industrial Estate – batam,
Bintan Inti Industrial Estate – batam,
KI Wiraraja – batam,
Kawasan Industri Medan (KIM) – sumatera utara,
Padang Industrial Park – sumatera barat,
KI Ladong – aceh,
Kawasan Industri Lampung (KAIL) – bandar lampung,
Kawasan Terintegrasi Merak-Bakauheni,
KI Tenayan – pekanbaru,
KI Dumai &a

mp; KI Tanjung Buton – riau.

/>Pulau kalimantan :

Kawasan Industri Kariangau (KIK) – balikpapan,
Kawasan Industri Buluminung – Penajam Paser Utara,
Industri Bontang – kaltim,
Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
Kawasan Industri Ketapang,
Industri Mandor – kab landak,
Industri Jorong – tanah laut,
Kawasan Industri Batulicin – tanah bumbu,

Pulau sulawesi :

Kawasan Industri Morowali (IMIP) sulteng,
Kawasan Industri Indonesia Huabao (IHIP) – morowali,
Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
Industri Palu (KEK Palu),
Kawasan Industri Konawe (VDNIP) – morosi,
Kawasan Industri Pomalaa,
Industri Motui – konawe utara,
Industri Kendari,
IKIP (Indonesia Konawe Industrial Park),
Kawasan Industri Makassar (KIMA) – sulsel,
Kawasan Industri Bantaeng (KIBA),
Industri Takalar,
Maros Industrial Park,
Kawasan Industri Mongondow (KIMONG),
Kawasan

Ekonomi Khusus (KEK) Bitung.</p>

Pulau papua :

Kawasan Industri Tangguh – teluk bintuni,
Kawasan Industri Fakfak – papua barat,
Industri Timika – papua tengah,
Kawasan Industri Merauke,
dan support alat alat perusahaan manufactur, logistic, tamba

n, perkebunan dan peternakan