Toyota Forklift C4E180LII | 1.8 ton

Description

Toyota Forklift C4E180LII | 1.8 ton

BELIALAT.COM support unit, parts, service, rental, maintenance contract, overhaul, reconditioned Toyota Forklift C4E180LII | 1.8 ton

The Toyota C4E180LII is a 1.8-ton electric counterbalance forklift typically associated with the 8-Series lineup.
It is designed for indoor and warehouse environments where zero emissions and low noise levels are required.
Below are the technical specifications for this unit:

Core Performance & Capacity

• Load Capacity: 1,800 kg (1.8 tons).
• Load Center: 500 mm.
• Power Type: Electric (Battery powered).
• Operator Position: Rider Seated.
• Drive Type: 4-wheel electric.

Dimensions & Maneuverability

• Overall Width: ~1,065 mm.
• Turning Radius (Outside): 1,780 mm.
• Length to Fork Face: 2,115 mm.
• Overhead Guard Height: ~2,095 mm.
• Standard Fork Size (TxWxL): 35 x 100 x 1,070 mm.
• Right-Angle Stacking Aisle Width: ~2,185 mm (plus load length and clearance).

Mast & Lifting

• Standard Max Fork Height: 3,000 mm (options available up to 6,000 mm).
• Free Lift: 145 mm (standard mast).
• Tilt Range: 6 degrees forward / 11 degrees backward.
• Lifting Speed (Full Load): ~370 mm/sec.
• Lowering Speed (Full Load): ~500 mm/sec.

Electrical System

• Voltage: 48V.
• Battery Capacity: Standard 390 Ah (High-capacity options up to 565 Ah).
• Motor (Drive): 7.6 kW AC motor.
• Motor (Load Handling/Steering): 9.5 kW AC motor.
• Controller Type: AC Inverter.

Key Features

• SAS (System of Active Stability): Electronic monitors that help prevent lateral tip-overs by locking the rear axle and controlling mast functions.
• OPS (Operator Presence Sensing): Disables travel and hydraulic functions if the operator is not properly seated.
• IPX4 Rating: Provides water resistance, allowing for limited outdoor use in light rain or damp conditions.
• Digital Display: Integrated monitoring system for battery status, hour meter, and performance modes.

The Mastery of True Potential

Mastery of any undertaking can only be achieved if there is true potential and unwavering dedication to excellence. To Toyota, the 8 Series is the proud culmination of 50 years in the pursuit of mastery in the development and manufacture of forklifts.

Outstanding Comfort and Visibility

• The 8 Series provides the comfort and visibility for long hours of efficient operation.

Efficiency-Boosting Operability

• The operator’s compartment is carefully designed to ensure maximum forklift control from minimum operator effort.

Top-Class Stability

• Toyota’s System of Active Stability (SAS), Operator Presence Sensing (OPS) system and Travel and Load Handling Control provide innovative, high-tech stability to the 8 Series.

Environmental Friendliness

• Low noise and exhaust emissions make the 8 Series environmentally friendly.

Built-in Reliability and Serviceability

• Designed to be tough and easy to maintain.

True Potential Through Outstanding Comfort and Visibility

• Comfort is a Toyota tradition. With the 8 Series, it starts from the time you enter. Grab the large assist grip, place your foot on the wide, low step and slide into the operator’s seat that provides comfort, support and retention.
• Once you have been seated and wrapped your hands around the small- diameter steering wheel you will intuitively feel that everything you need for operating the forklift is within natural reach.
• You will also instantly realize that you have a clear view of the forks and load.
• This comfort sets the stage for reaching the true potential of the forklift from Toyota.

Easy Entry and Exit

• A large assist grip, A deep, wide step and a spacious opening team up for easy entry onto the forklift.

Comfort and Support ORS* Seat

• The ORS seat can be adjusted 150 mm forward and backward to provide comfort and support to almost all sizes of operators. *ORS: Operator Restraint System.

Outstanding Visibility

• The overhead guard, mast and instrument panel have been designed to provide excellent visibility of the fork tips at the most frequently used lift heights.

Wide Floor Space

• The spacious floor area enables a more relaxed operating position that contributes to comfort.

True Potential Through Outstanding Operability

• Toyota used the latest technology to reexamine forklift operation in its search for enhanced operability. Motion-capture technology monitored every aspect of operator movement looking for ways to make operation more efficient.
• Based on these findings, well-thought-out design changes were combined to make the 8 Series ready to transform every action of the operator into smooth and efficient operation.

Operator-Friendly Steering Wheel

• The small-diameter steering wheel teams up with the full hydraulic power steering system to provide excellent maneuverability. The steering column offers step-less adjustment to accommodate a wide range of operator preferences.
• Bagian bagian componet forklift terdiri dari Mesin, Transmisi, roda depan, roda belakang, rem, hydraulic, steer, mast dll

Foot-Activated Parking Brake (Powershift models)

• The operator simply depresses the parking brake pedal to set it without changing operating position. A conveniently located handle is used to release it.

Rear-Pillar Assist Grip / Swivel Seat

• The seat swivels to the right to facilitate operation in reverse. Firstly,The seat also swivels to the left to make it easier to enter and exit the forklift.
• An optionally available rear-pillar assist grip with a horn button enhances comfort by offering easy horn operation while traveling in reverse.

Support kawasan industri diseluruh indonesia antara lain

Jawa

• Jababeka – cikarang ,
• Lippo – cikarang,
• Kawasan Industri MM 2100 – cibitung,
• KIIC – Karawang,
• Suryacipta – karawang,
• Kota bukit indah – purwakarta,
• Subang smartpolitan – subang,
• Kawasan industri terpadu wilmar – serang,
• Kawasan industri krakatau – cilegon,
• Modern cikande industrial – cikande,
• Industri terpadu batang ( KITB ).
• Kawasan industri kendal,
• Industri wijaya kusuma – semarang,
• Java integrated and ports estate – gersik,
• Kawasan industri pier – pasuruan,
• SIER ( surabaya industrial estate rungkut – surabaya,
• Ngoro industrial park ( NIP) – mojokerto.

Sumumatera

• KEK Sei Mangkei – sumatera utara,
• KEK Arun Lhokseumawe – aceh,
• KEK Galang Batang – Riau,
• KI Kuala Tanjung – sumatera utara,
• KI Tanjung Enim – sumatera selatan,
• Batamindo Industrial Park – Batam,
• Kabil Integrated Industrial Park – batam,
• Panbil Industrial Estate – batam,
• Bintan Inti Industrial Estate – batam,
• KI Wiraraja – batam,
• Kawasan Industri Medan (KIM) – sumatera utara,
• Padang Industrial Park – sumatera barat,
• KI Ladong – aceh,
• Kawasan Industri Lampung (KAIL) – bandar lampung,
• Kawasan Terintegrasi Merak-Bakauheni,
• KI Tenayan – pekanbaru,
• KI Dumai & KI Tanjung Buton – riau.

Kalimantan

• Kawasan Industri Kariangau (KIK) – balikpapan,
• Kawasan Industri Buluminung – Penajam Paser Utara,
• Industri Bontang – kaltim,
• Industri Maloy Batuta Trans Kalimantan (MBTK) – kutai timur,
• Kawasan Industri dan Pelabuhan Internasional (KIPI) – tanah kuning,
• Kawasan Industri Ketapang,
• Industri Mandor – kab landak,
• Industri Jorong – tanah laut,
• Kawasan Industri Batulicin – tanah bumbu,

Sulawesi

• Kawasan Industri Morowali (IMIP) sulteng,
• Kawasan Industri Indonesia Huabao (IHIP) – morowali,
• Industri Neo Energy Morowali (NEMIE) & Parimo (NEPIE),
• Industri Palu (KEK Palu),
• Kawasan Industri Konawe (VDNIP) – morosi,
• Kawasan Industri Pomalaa,
• Industri Motui – konawe utara,
• Industri Kendari,
• IKIP (Indonesia Konawe Industrial Park),
• Kawasan Industri Makassar (KIMA) – sulsel,
• Kawasan Industri Bantaeng (KIBA),
• Industri Takalar,
• Maros Industrial Park,
• Kawasan Industri Mongondow (KIMONG),
• Kawasan Ekonomi Khusus (KEK) Bitung.

Papua

• • Kawasan Industri Tangguh – teluk bintuni,
  • Kawasan Industri Fakfak – papua barat,
  • Industri Timika – papua tengah,
  • Kawasan Industri Merauke, dan support alat alat perusahaan manufactur, logistic, tamban, perkebunan dan peternakan